Re: Windows XP problem

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



Ron, I would take it back to the Repair Shop. It seems they didn't do a
thorough job of getting your system running properly.
Here is information on Amd and SP3
http://www.lockergnome.com/theoracle/2008/05/09/got-an-amd-processor-dont-install-service-pack-3/

"R Flitter" <Ron.flitter@xxxxxxxxxxx> wrote in message
news:F99203A6-18C6-43D9-A213-4C867FD006B8@xxxxxxxxxxxxxxxx
I recently installed SP3 and had problems with it. System would start to
boot and then got a chkdsk file not found and system would then try to
reboot and go into a loop. Tried to boot into safe mode and could not get
in. Tried the XP cd boot and could not get in.

Took the machine to a repair shop and they ended up rolling the system
back to SP2. My processor is an AMD. I am hearing that there is a
problem with the SP3 and AMD processors. Is that true????

Proceeding with the problems.

Computer seemed to work OK except that I could not start Outlook Express.
Got a MSOERES.DLL could not be found. Outlook
Express may not be installed properly. Error message.

There was a fix on the net that I down loaded but when I clicked on the
program to run it --- nothing happened.

Then went and downloaded SP2 and was going to do a reinstall that and that
will not run.

Can anyone help me on why these will not run???


.



Relevant Pages

  • Re: COMP wont go past HP screen at Begining! HELP
    ... As of safely downloading Windows from Internet, ... If you were here you'd be already running OK - I can boot with bare hands ... Bring to a repair shop, ... he can contact HP for recovery disk. ...
    (microsoft.public.windows.vista.general)
  • Re: New to Linux
    ... Intel Pentium Pro, Pentium II/III/4 and Celerons, and AMD ... least 32 MB of RAM to boot slax. ... Medium:either IDE connected CDROM (to boot from the CD) ...
    (comp.os.linux.setup)
  • Re: Vista wont start or boot
    ... Many thanks and kudos to Brink. ... the need to lose my machine to a repair shop for many days. ... I took out the cell battery after unscrewing a panel on the bottom of the ... You can try running a Startup Repair to see if it can fix the boot ...
    (microsoft.public.windows.vista.general)
  • Stuck between current and 9 release.
    ... I was running current last month, had a health emergency and when I could check the server current was 10. ... Port upgrades were building fine with portmaster so I just decided to reboot to see if all was well.it wasn't,, the machine won't boot. ... I have been looking for an amd 64 version of a release snapshot and haven't found anything close. ... I could use any suggestions especially since I don't even have a amd64 snapshot other than old ones to do a reinstall especially if there is a problem with the release. ...
    (freebsd-questions)
  • Re: Stuck between current and 9 release.
    ... switched all my csup files to release and begin building a new world ... machine won't boot. ... any suggestions especially since I don't even have a amd64 snapshot ... an AMD RELEASE 9 snap somewhere other than what is in the handbook. ...
    (freebsd-questions)