Re: is usb flash drive damaged by not using SAFELY REMOVING HARDWARE function?

Problem Solved! I went to Imation's website and learned that indeed,
there is a write protect switch on the flash drive. The switch is the
size of a pinhead. I switched positions on the switch and no more
"write protect" errors. All is well!
Thank you! Aaron



On Jul 16, 12:34 am, "M.I.5¾" <no....@xxxxxxxxxxxxxxxxxxxxxx> wrote:
<aaro...@xxxxxxxxxxx> wrote in message

news:c5d24078-2740-4450-aec0-15e50d7f2a3b@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

When attempting to write to one of my USB flash drives, I get error
message "cannot save because drive is write protected".   I didn't
know that these drives can be write protected.

Some models do have a write protect switch.

It may be that I removed the drive while the computer was on and did



not use the SAFELY REMOVE HARDWARE function.   If this is the
situation, is there a method whereby the
drive can be restored or refreshed, etc.

If the flash stick is set up as 'optimised for speed' then, yes, failing to
stop it under 'safely remove ...' risks removing it before the buffered data
is written back.  More importantly, it risks that the stick is pulled while
the all important FAT and TOC are being written.  If these get corrupted
than some or all of the data can be lost.

It is better if the stick is set up as 'optimised for fast removal'.  It is
only then necesary to check that the access light on the stick isn't
flashing before pulling it.  The speed penalty is negligible for FLASH
memory sticks.

.

Relevant Pages

  • Re: Need recommendation for USB Thumb Drive
    ... My imation swivel drive corrupts everytime I copy something ... a "write protect" switch. ... machines and Windows' viruses now will jump to thumb drives.) ... don't think it comes with a write protect switch though. ...
    (comp.os.linux.misc)
  • Need recommendation for USB Thumb Drive
    ... My imation swivel drive corrupts everytime I copy something ... a "write protect" switch. ... machines and Windows' viruses now will jump to thumb drives.) ...
    (comp.os.linux.misc)
  • Re: New build - halt on ACPI Controller
    ... first I could boot from a cdrom no problem. ... on the hdd from a previous install attempt. ... to do was leave any such drives disconnected from the MoBo and verify ... landed up using the rear panel mains isolator switch to switch it off as ...
    (uk.comp.homebuilt)
  • RE: Exploit code for IP Smart Spoofing
    ... If there is a MAC violation, this is logged and the port is ... traffic of one other host on the switch. ... but there is no way to protect against ...
    (Bugtraq)
  • Re: ad0 READ_DMA TIMEOUT errors on install of 7.0-RELEASE
    ... It does not matter how new/old the disk is, ... I always figured it was due to the rotational speed increase in commodity drives. ... I'm assuming that it is total power on time since the drive was manufactured. ... Help me or I switch to DragonFly BSD/Desktop BSD/Linux which is perfect and has no problems!" ...
    (freebsd-stable)