Re: electricity turned off during the installation of update

I will try that, in anyway thanks.

sevVDE

"Mark L. Ferguson" wrote:

CHKDSK /R
This command, run from the Recovery Console might fix the unmountable error
To open the Recovery Console prompt, you would need to boot to an XP setup
CD.
Description of the Windows XP Recovery Console:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;314058
--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPostAsAnswer
Mark L. Ferguson
.

"sevVDE" <sevVDE@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7EF8FAC8-D0F8-48CA-9F78-363CA083A5D2@xxxxxxxxxxxxxxxx
Thank you but it is not working neither. When i press safe mode with
command
prompt i still have the same, i can not enter the program. It stops and
send
me the following: (sorry for the english, i try to translate what says the
computer, i bought it in belgium and then i have a french version):
A pb was detected and windows stopped to prevent any domage to your
computer.
UNMOUNTABLE_BOOT_VOLUME

If you see this screen for the first time, reset your compute. If this
screen appear again, folow this steps:

Assure yourself that all new material or software were install correctly.
If it is a new instalation, contact the producer of the software to obtain
the windows' update you need.
If you still have pb, desactivate or suppress all hardware or software
newly
installed. Desactivate the option of memory of the bios like the "mise en
cache" or the "ombrage".
If you need to used the no error mode to suppress or desactivate the
composant, reset your computer, press F8 to choose the advanced option of
démarrage then choose no error mode.

technical informations:
*** STOP: 0X000000ED (0X8674A7B8,0XC0000006,0X00000000,0X00000000)


I tried the command prompt, the no-error mode, the debug, last good
configuration but nothing works. When i choose no error mode then the
screen
of windows appears for some second after I receive the blue screen i wrote
here up.

Thank you in advance for any help,

sevVDE

"Mark L. Ferguson" wrote:

Pressing F8 during the 'black screen' right after the BIOS screen, will
let
you choose "Last Known Good Configuration"

If no help, try "Safe Mode with Command Prompt" and run the command to
start
'System Restore'
HOW TO Start System Restore Tool from Command Prompt (Q304449):
http://support.microsoft.com/support/kb/articles/q304/4/49.asp
--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPostAsAnswer
Mark L. Ferguson
.

"sevVDE" <sevVDE@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:74B4E26E-9E34-4000-8850-7289FD796D15@xxxxxxxxxxxxxxxx
hello everybody,

yesterday i was installing the update for windows xp when my computer
turned
off bcs electricity pb. Now, I am enable to turn on my computer, even
in
without mistake manner. (mode sans echec). if i suppress the auto
turning
off and on by pressing F8, i get a message where it tell me to turn on
the
computer in no mistake manner. It tells me also the following error
message:

0X000000ED (0X8674A7B8,0XC0000006,0X00000000,0X00000000)


What should I do? I need my computer asap bcs I am in exam and most of
the
information I need is in.

Thanks in advance for your help

SevVDE

.

Loading