Re: SP3 Success - 2 down 22 to go

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



Make that 3 down, 21 to go. But while the 1st two upgrades were problem-free, the 3rd machine made up for that. It would run to the point of getting just past the "Checking Product Key" step, then BLAM it crashed with a blank screen, and C-A-D didn't work. It took 5 or 6 attempts of trying most things on the MS SP3 suggestions list before I finally booted up in Safe Mode and installed with the 324 meg SP3 file I'd downloaded. I don't know why this last PC was so difficult except that I had a pot full of USB devices plus an old parallel port scanner. After wasting about 8 hours struggling with that beast, I'd recommend this process to anyone encountering a crash like I did.

"Hula Baloo" <wpgwpg@xxxxxxxxx> wrote in message news:uFXnibRuIHA.4376@xxxxxxxxxxxxxxxxxxxxxxx
After reading all the reports of SP3 problems, several of which were on configurations similar to mine, I just thought it'd be nice to report a trouble-free installation on 2 out of 2 machines I've tested it on so far. The first PC is a 7 year old Dell Dimension 8100 with a 1.3 GHz P4, the second one a 2 year old RYO machine with an Intel 3.2 GHz Prescott CPU with HT. I have these networked via both a wired D-Link router and a Wireless-G Netgear router (for use with my laptop running Vista). I've tested all my software and hardware and found one and only one problem. My Works 9 calendar stopped running, but uninstall/reinstall quickly fixed that. Details of the 3.2 GHz software/hardware where I've done most of my testing so far are below.
I've been humbled too many times by upgrades, so I'm not here to gloat, just report that SP3 does work well for at least SOME of us. My next machine has an AMD 3500 CPU, so I've renamed the INTELPPM.SYS file in preparation to upgrade it. If that goes well, I've got 21 new Dell Optiplex machines to go (Intel 1.8 GHz dual core CPUs w/XP Pro).
Here're the details of the 3.2 GHz system I've done most testing on. Software: OE 6, IE 7, Roxio Suite 7, Word 2002 SP3, Ad-Aware 2007, Quicken Deluxe 2005,
Power DVD V4, Firefox 2.0.0.12, AOL 9.1, Adobe reader 7.0, Jasc Paint Shop Pro 9,
The Print Shop 22, Mozilla Thunderbird, Norton Ghost 9, OpenOffice 2.0,
Partition Magic 8, WordPerfect Family Pack 5, ZoneAlarm Firewall, Belarc Advisor, MS Works 9.
Hardware: Intel P4 Prescott 3.2 GHz CPU with HT, 1 GB dual channel DDR RAM,
Airlink101 PCI wireless-G card, Integrated 10/100 NIC, 4 networked PCs,
Shared printers (Samsung & Canon), DVD ROM, DVD RW, WD 36 GB 10K RPM C: drive (PATA),
Seagate SATA 120 GB D: drive, external Seagate SATA 160 GB HD via USB.

.



Relevant Pages

  • Re: Alternative to Powerleap P4 processor upgrade
    ... the market for CPU upgrades was due to decline simply because clock multipliers ... powerleap did write back by they way. ... I know that generally processor upgrades just don't make sense these ...
    (alt.sys.pc-clone.dell)
  • Re: OT: CPUs
    ... Pentium Dual-Core Mobile Processor T2370 (1.73 GHz) $0.00 ... And spring the most amount of money for a CPU ... ) Even the lowliest iMac or MacBook meets or exceeds your specs (the lowest MacBook is 2.1 GHz, the lowest iMac is 2.4 GHz, the lowest MacBook Pro is also 2.4 GHz. ...
    (talk.origins)
  • Re: P4m: Speedstep defekt, CPU/Board kaputt?
    ... Mit der Funktion "Detext max. Speed" von Speedswitch (was die CPU auf volle Leistung antreibt und den Wert ausliest) kommt ebenfalls nur mehr auf 1,2 GHz. ... Beendet man I8kFanGUI bleibt auch die ...
    (de.comp.sys.notebooks)
  • Machine stuck at 1000 MHz
    ... cpufreq-info Dominik Brodowski 2004-2009 ... 1000 MHz - 2.70 GHz ... current CPU frequency is 2.70 GHz. ... mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext ...
    (Ubuntu)
  • Re: Intel Pentium Dual Core E5200 and Enhanced Speedstep
    ... > I have a small problem/question about my Pentium Dual Core E5200. ... > that the CPU frequency may not be running at the highest speed. ... > and increases at 2.66 GHz when the CPU is under load. ... You maybe should quote the earlier dmesgs re ACPI ...
    (freebsd-questions)