Re: PC won't come out of Standby

The power light comes on and the the 2 fans fire up but neither the monitor
or USB devices activate.

Thanks.
Rod.

"Unknown" wrote:

Is the power-on light on or off when attempting to come out of standby?
"RodF" <RodF@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FBA28435-705E-4565-B743-213413C651FD@xxxxxxxxxxxxxxxx
Hi, Thanks for he response. The problem is definately with Stand by as I
has
turned hibernation off. My ACPI is in S3 mode if this helps.
Thanks.

Rod.

"Unknown" wrote:

Standby or hibernate??? Power remains on in standby but is off in
hibernate.
"RodF" <RodF@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:20EBD034-1679-418B-9B84-8625561B20A2@xxxxxxxxxxxxxxxx
When I try and bring my computer out of Standby the power light comes
on
the
fans start (not sure if the Hard drive spins up) but the monitor and
all
USB
devices do not start. I have all the latest XP updates and drivers and
the
problem just started a few days ago out of the blue. I have tried
everything
I can think of and would really appreciate some help.
Thanks. Rod.






.

Relevant Pages

  • Re: Line Busy status
    ... lineInitialize returned SUCCESS ... lineGetDevCaps returned SUCCESS ... dwCallerIDFlags=x2c, NAME ADDRESS UNKNOWN ... > which lines are station lines and which lines you want to monitor. ...
    (microsoft.public.win32.programmer.tapi)
  • Re: Comp. wont POST until reboot
    ... Whenever I first turn it on, it looks and sounds as though it is ... that the monitor remains black and it doesn't POST. ... Remove ALL USB devices and turn it ... If it does not (or you don't have any USB devices - or only a usb keyboard ...
    (microsoft.public.windowsxp.general)
  • WinCE6.0 - Notifications for "Unknown" usb devices
    ... Is there a way to get device notifications (WM_DEVICECHANGE or any other ... Here unknown devices means ... usb devices for which drivers are not installed. ... I tried this - After inserting a usb device for which drivers are not ...
    (microsoft.public.windowsce.embedded)
  • Re: corrupt display (occasionally)
    ... > That eliminates drivers as the issue, but it doesn't eliminate the hardware ... like a small crack in one of the connections on the video card. ... lists monitor as "default monitor", so I'm assuming that NEC MultiSync ... bit color) forced onto a "default monitor" at "unknown" location (w/ unknown ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: screen saver in window xp
    ... If you set it for ten minutes for example, it will shut down the monitor ... "Unknown" wrote: ... my screen saver works meaning i set a time for the display to go off ... my power scheme is set to>>>minimal power management ...
    (microsoft.public.windowsxp.general)