Re: Boots into CMOS...?




"Todd" <Todd@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:B7D64180-EA8E-49A8-80A8-8C6FF5DCBD10@xxxxxxxxxxxxxxxx
As I stated, everything is fine, time, date the works, i can easly exit
and
save, or exit and not save and it boots fine.





ECS motherboard by any chance???



"philo" wrote:


"Todd" <Todd@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:A544AF94-116D-4124-9571-015549DFAB98@xxxxxxxxxxxxxxxx
I get no errors at all, everything is running great, but for some
reason
about 3 weeks ago, the system upon booting up goes through a system
check
and
goes right into the cmos menu. No errors or anything, I can get right
out
of
it and it boots fine. I can not for the life of me figure out how to
stop
this, any advice would be greatly appreciated.


Rather then simply exit...

try to *save* and exit.

If that does not fix it try replacing your cmos battery





.



Relevant Pages

  • Re: Having trouble starting car...Corolla
    ... Pick a shop that employs technicians certified by the National Institute ... unless you are absolutely positive of your diagnosis. ... problem it's intended to fix. ... to approve replacing it, they then replaced the whatsis and the problem ...
    (alt.autos.toyota)
  • Re: Having trouble starting car...Corolla
    ... Pick a shop that employs technicians certified by the National ... unless you are absolutely positive of your diagnosis. ... problem it's intended to fix. ... if replacing a certain part would fix the problem, and when it didn't, ...
    (alt.autos.toyota)
  • Re: [opensuse] Replaced ALL HW: Tyan S2469 Athlon MP still hangs OpenSuSE 10.2
    ... (That seemed to be fixed after replacing the ... didn't fix it; replaced the running ... > Replaced the motherboard, with new processors... ... For additional commands, e-mail: opensuse+help@xxxxxxxxxxxx ...
    (SuSE)
  • Re: [opensuse] Replaced ALL HW: Tyan S2469 Athlon MP still hangs OpenSuSE 10.2
    ... (That seemed to be fixed after replacing the ... didn't fix it; replaced the running ... and serial in the BIOS, replaced the SCSI card, replaced SCSI w/ IDE ... Replaced the motherboard, with new processors... ...
    (SuSE)
  • [GIT PATCHES] kbuild updates for -rc3
    ... kconfig: fix /dev/null breakage ... to gcc in the check-lxdialog.sh script and gcc did ... # Build targets only - this includes vmlinux, arch specific targets, clean ...
    (Linux-Kernel)