Re: Stop error 0x000000Di
- From: desertgal <desertgal2@xxxxxxxxxxxx>
- Date: Wed, 02 Apr 2008 14:07:38 -0600
nass wrote:
"desertgal" wrote:The problem is that it doesn't show the Device unless it's plugged in & if I try to plug anything into the front ports it just says it's malfunctioning.
nass wrote:
"desertgal" wrote:Thanks for the reply.
I'm getting an intermittent Driver IRQL Stop error. I can't produce it, it just happens sometimes several times a day sometimes I go all day without the error.Why you don't try System Restore for an earlier date before the Software installation incident took place?.
Stop: oxooooooD1 (0x0000002 0x0000001 0xF6E7A2B5)
USBPORT.SYS-Address F6E7A2B5 Base @ F6E7500 Datestamp 41107d6Z (Z is possibly a 2)
This started after I installed drivers for a Samsung mobile phone. I've removed all the Samsung software & registry entries I can find & all the USB ports show as functioning normally in Device Manager.
I'm trying to avoid taking it to the shop as the guy in town is busy & slow, he'll probably have it for a couple of days for a 5 minute fix.
Running Windows XP SP2 with all updates.
Or try the info here, it is look s like one of your USB devices is malfunctioning/your modem may be!.
http://forum.us.dell.com/supportforums/board/message?board.id=si_virus&message.id=51756
Error Message:
IRQL_NOT_LESS_OR_EQUAL http://msdn.microsoft.com/library/default.asp?url=/library/en-us/w2kmsgs/6077.asp
http://www.updatexp.com/stop-messages.html
How old the machine?, try to update the BIOS from the Machine manufacturer website.
HTH.
nass
---
http://www.nasstec.co.uk
One of the first things I tried was System Restore, no luck.
I don't know about the modem since we have satellite, not a traditional dial-up modem.
It seems like the 2 USB ports on the front of the box are malfunctioning because when I plug anything into them I get a message that the device is malfunctioning, but I can use the ones on the back.
We just had everything updated last summer. New everything except the box.
The problem started when I installed drivers for a Samsung mobile phone. I tried removing everything I could find connected to the install, got the latest drivers for the phone, still the front usb ports won't work. The ones on the back work fine. How do I fix the ports on the front of the box??
If you read the Article on the DEll Forum you will see you can unistall the USB ports and Reboot your machine. Windows will detect and install the Device.
Does the USB in device manager show you have USB2?.
None of the ports show USB2 but that's one of the reasons we had the computer re-done, my digital camera needs USB2,since the problem started the front ports don't even recognize the camera.
I need to find out how to figure out which ports are the problem.
I guess I'm going to have to take it to the shop. Just hate to be without it for a couple of days for a 10 minute fix, the guy here in town is slow.
.
- References:
- Stop error 0x000000Di
- From: desertgal
- RE: Stop error 0x000000Di
- From: nass
- Re: Stop error 0x000000Di
- From: desertgal
- Re: Stop error 0x000000Di
- From: nass
- Stop error 0x000000Di
- Prev by Date: RE: Can't boot XP - even from install disk - but linux boots
- Next by Date: registry editing
- Previous by thread: Re: Stop error 0x000000Di
- Next by thread: Programs won't open
- Index(es):
Relevant Pages
|
