Re: Hardware acceleration

Unless the web site for the maker of your system offered drivers for the 'chipset' or video, you probably won't find any anywhere else.
Not that Nero is guaranteed to work any better if you did. It looks like either a limitation of Nero, or your hardware drivers. in either case, I think you are stuck with using something else.

--
Was this helpful? Then click the Ratings button. Voting helps the web
interface. http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPostAsAnswer
Mark L. Ferguson
..

"Mainer" <Mainer@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message news:50FFD4E7-0F36-4A9D-BB93-25942C1E5AC5@xxxxxxxxxxxxxxxx
Mark,

I did as you said and had no problem with your directions........ you make
"things" easy, LOL.
Unfortunately, after the "scan for hardware changes", there were no drivers
found for that ? other drivers>video controller device.
Maybe this is a driver used/acknowledged when I plug my MP3 player in to
load music, or my cell phone for files/ringtones, etc?

Again, thank you for your help and time.

"Mark L. Ferguson" wrote:

Go to Start/Run, and type DEVMGMT.MSC , highlight the VGA Compatible device,
Action menu, "Uninstall", (do Not put a check in 'delete driver") then
Action menu,"scan for hardware changes", to find the device drivers again
automatically.

--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPostAsAnswer
Mark L. Ferguson
.

"Mainer" <Mainer@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:4A8B5A92-843C-4E79-8B02-E528AD49D608@xxxxxxxxxxxxxxxx
> Mark,
>
> Thank you for your help. Unfortunatley, I am still having trouble. I > ran
> the
> command DXDIAG as you mentioned and everything checked out ok as far as > I
> could tell. All my tests seemed to work and I was prompted that things
> were
> working properly. HOWEVER, when going to the Display tab, I noticed > that
> Direct X features are not availible! The able/disable buttons are > greyed
> out
> and I cannot figure out why or if this should be. I also went to > Drivers
> in
> the device manager and found a big yellow question mark beside " Other
> Drivers - Video controller (VGA Compatable) ?"
>
> Maybe I lost my direct X??????
>
> Totaly eneducated to this computer stuff so please understand.
>
> Again, Thank you for your time.
>
> Hope this helps,
>
> Bob
>
> "Mark L. Ferguson" wrote:
>
>> I'm not sure you are going to find a connection between you Video >> driver,
>> and your burner driver, but anything is possible. You can run the >> command
>> DXDIAG to see what is going on in your Video acceleration.
>> Turning off the built-in burning feature in Windows may help the dual
>> layer
>> problem, but that's a guess. Rightclick the drive icon in Explorer and
>> uncheck it on the "Recording" tab.
>>
>> -- >> Was this helpful? Then click the Ratings button. Voting helps the web
>> interface.
>> http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPostAsAnswer
>> Mark L. Ferguson
>> .
>>
>> "Mainer" <Mainer@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:88772AFC-549B-477B-A20F-C19F8152AEFC@xxxxxxxxxxxxxxxx
>> > When using Nero Vision to burn DVD's I get a warning message at
>> > starting
>> > the
>> > Nero Program up.....
>> > "Hardware acceleration is deactivated. Some capture devices may not
>> > work
>> > properly. You can activate hardware acceleration using the Direct X
>> > diagnostics tool".
>> >
>> > I am not sure about the direct x diagnostics tool and how to get >> > there
>> > and
>> > use it. However, when going into Control Panel>Display>Settings and
>> > clicking
>> > on ADVANCED, I see that Hardware acceleration is set to full. This
>> > tells
>> > me
>> > that it is set and activated, correct?
>> > The problem I am having is that none of my burning programs will do >> > a
>> > dual
>> > layer disc. I use Nero (this is the only program that gives me a
>> > message
>> > of
>> > hardware acceleration is deactivated), DVD Decryptor, DVD Shrink, >> > Image
>> > Burn,
>> > Magic ISO and others for various tasks. I have burned dual layers in
>> > the
>> > past
>> > but am now wasting dual layer discs due to errors half way through >> > the
>> > burn.
>> > I can use Nero and burn these larger files by reducing quality and
>> > putting
>> > them on a single layer disc, but the same file onto a dual layer for
>> > better
>> > quality, errors out half way through the burn.
>> > I'm using Windows XP Home Edition 2002 with service pack2 if this
>> > helps.
>> > Does this hardware acceleration message/prompt have anything to do >> > with
>> > my
>> > dual layer burner(s) not working properly?
>> > PLEASE HELP.... :-(
>> >
>> > Thanks, Bob
>> >
.