Re: Can't boot from floppy anymore

philo wrote:
"Lang Murphy" <lang_murphy@xxxxxxxxxxx> wrote in message
news:89D20A14-FFA1-4A80-B4F1-5E57A20E8667@xxxxxxxxxxxxxxxx
"Michael" <nospam@xxxxxxxxx> wrote in message
news:O7LhyUVkIHA.5080@xxxxxxxxxxxxxxxxxxxxxxx
the floppy has XP

Uh... what? Never heard of a bootable XP floppy. Most likely, you have a
DOS
bootable diskette with drivers to access FAT32 and/or NTFS disks.

What errors are you getting when you try to boot from the disk?

Lang

What OS does the floppy have on it?

-Frank


If you format a floppy on an XP machine then copy over the "boot" files
ntldr, ntdetect.com and boot.ini the floppy will boot you right into XP
.

Since Vista uses a different boot loader that boot floppy cannot work for
booting into Vista

Interesting. I have a general question regarding the use of this specific
boot floppy. Can I assume the only time it could be useful is if one or
more of the three files (ntldr, ntdetect.com, boot.ini) on the hard disk is
corrupted or missing? Or are there some other possible situations that
would allow it to boot where the HD wouldn't?


.

Relevant Pages

  • Re: Unable to boot to existing 2003 server
    ... Formatted a floppy using 2003 server. ... Could not read from selected boot disk. ...
    (microsoft.public.windows.server.general)
  • Re: unable to install XP on new HD
    ... connected to the primary master HD and I was once able to boot to OS XP ... the floppy ... For a boot disk go here: http://www.bootdisk.com/bootdisk.htm and use the ... files and so I have to abort installation. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Rebuilt Mirror Wont Boot
    ... I would not be able to boot from the floppy since it is not on ... I am still at square one with a server that I can boot off a floppy ... I cannot boot the server using the same boot.ini file on the C drive. ... Since disk1 is the disk I used to create the new mirror with disk0, ...
    (microsoft.public.windows.server.general)
  • Re: ACPI errors in event viewer
    ... but the XP boot floppy set does indeed use 6 disks. ... >> I tried bios on disk by themselves with the alt f2 method. ...
    (microsoft.public.windowsxp.general)
  • Re: error message in windows XP home
    ... "Non-System Disk or disk error ... I don't have a cd-rom or floppy disk in the unity but when I start compare this message! ... Are you CMOS settings set to attempt booting from the floppy or CD/DVD ... set to first attempt a boot from removable media if the computer is ...
    (microsoft.public.windowsxp.general)