Re: page_fault in non-paged_area ntfs.sys Stop 0x00000050 in anymo

Thanks

I’ve run Bart PE but unfortunately because ntfs partitions (drive) are not
assigned (mounted)! chkdsk can not run. Only the x drive (CD) is view from
this boot

I’ve got same bad result using the Microsoft Diagnostics and Recovery
Toolset (bootable) for XP SP2 environment.

http://www.microsoft.com/downloads/details.aspx?FamilyID=5D600369-0554-4595-8AB4-C34B2860E087&displaylang=en

How to mount or view ntfs partitions to be able to run chkdsk?
Thanks Eric


"Mark L. Ferguson" wrote:

Get a BartPE disk, and run chkdsk /r.

(BartPE) bootable live windows CD-DVD: http://www.nu2.nu/pebuilder/

--
Was this helpful? Then click the Ratings button. Voting helps the web
interface.
http://www.microsoft.com/wn3/locales/help/help_en-us.htm#RateAPostAsAnswer
Mark L. Ferguson
.

"Eric" <Eric@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:40A1CC8C-4BD7-403E-BDAD-5227D875AE4D@xxxxxxxxxxxxxxxx
Hello

On a laptop (ThinkPad) running XP Pro SP2 with two partitions C:, D;, + 1
hidden Recovery (XP preinstall).

Windows XP was running correctly but during an online update I got BSOD
page_fault in non-paged_area ntfs.sys Stop 0x00000050.

Since then every reboot crash (BSOD) after the XP logo is display
(loading)... with same page fault error.

Memory test OK no hardware has been changed or added

I've tried different options with no success!

1) Safe mode = BDSO (included command line mode)
2) Last good... = BDSO
3) Recovery console = BSDO!
4) Clean install using XP CD start correctly but when ready to setup does
not find any drive avaiable!
5) IBM recovery (From hidden partition) load (splash screen) and BSOD!

Booting DOS using a USB key and running DOS Partition Magic show all
partitions...
(C:) NTFS Active Primary (Boot)
(D:) NTFS None Primary
IBM_SERVICE FAT32 hidden Primary (IBM Recovery)

However Partition Magic Display Error #1516 on C: meaning “Partition
improperly dismounted”. After some research on TechNet all request either
to
run chkdsk to fix it or to rebuild the MBR using RC. Chkdsk from dos in
not
possible do not see any partitions and fixing MBR required to be able to
run
Recovery console!

Any suggestion idea how to fix it ???
Thanks
Eric

.