Re: reformatted and trying to reinstall...instead I get ntldr is



Thank you nesredep egrob,

"I may be able to get it to boot from floppy if I could get into bios.
Unfortunately again, I am having no luck. It was a custom made computer from
a few yrs back and have tried everything to get into bios with no luck. I
can't seem to figure out the right key to get me in there"

Once again, I cannot get into bios. Tried repeatedly for hours and tried
every key I could think of. No luck.

Thank you, can you think of anything else? Much appreciated.
"Mary" wrote:

Thank you Brian for the reply.

Unfortunately, I had been to this page at least a hundred times before I
posted here. As I stated, I made a boot floppy, and this is exactly where I
followed the directions to do it.

My problem seems to be that the computer is not reading anything, and
microsoft is giving me directions for it to read something. I would probably
be good to go if I could get past this message.

I may be able to get it to boot from floppy if I could get into bios.
Unfortunately again, I am having no luck. It was a custom made computer from
a few yrs back and have tried everything to get into bios with no luck. I
can't seem to figure out the right key to get me in there.

Thank you, Mary

"Brian A." wrote:

http://support.microsoft.com/search/default.aspx?mode=a&query=NTLDR+is+missing&catalog=LCID%3D1033&1033comm=1&spid=1173

or if the link wraps/breaks: http://tinyurl.com/2mj4nt

--

Brian A. Sesko { MS MVP_Shell/User }
Conflicts start where information lacks.
http://basconotw.mvps.org/

Suggested posting do's/don'ts: http://www.dts-l.org/goodpost.htm
How to ask a question: http://support.microsoft.com/kb/555375


"Mary" <Mary@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E0ADAF59-7CE7-4B28-8755-7F71E9BDE56D@xxxxxxxxxxxxxxxx
I reformatted to get rid of old junk. It is my intention to reinstall xp. It
would appear that the reformatting went well. It stated when it was finished
to type exit and hit enter. It would restart.

Well, It did restart with this message "NTLDR is missing Press Ctrl + Alt
+Del to restart". Of course nothing happens when you press the keys, it
restarts with the same message. I have the xp cd in when I restart, it
doesn't seem to be reading it. I made a floppy boot disk, it doesn't seem to
be acknowleding it either.

I cannot get it to do anything. It will only restart with the message.
Please help me before I am bald, (I don't own any wigs).

Thank you in advance. Mary


.



Relevant Pages

  • Re: program to map out weak HD sectors?
    ... >>> I don't have a floppy drive or bootable CDROM. ... Bios Date is 1998. ... can't boot from it. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Cpq Presario 906
    ... which comes w/o the internal FDD. ... also has the 26-pin flexprint floppy connector on the mobo, ... properly detected during POST and the BIOS briefly scans the ... floppy in it BUT is too stupid to actually boot from it! ...
    (comp.sys.laptops)
  • Re: Cpq Presario 906
    ... which comes w/o the internal FDD. ... also has the 26-pin flexprint floppy connector on the mobo, ... properly detected during POST and the BIOS briefly scans the ... floppy in it BUT is too stupid to actually boot from it! ...
    (comp.sys.laptops)
  • Re: FC4 and Assembly Language Program
    ... i am about to make a bootable floppy for test ... #objcopy -O binary myos.o BOOT ... Does the BIOS actually contain the software interrupt code you are ...
    (Fedora)
  • Re: so I decided to remove SUSE 9.2 from my machine
    ... > If that works AND IF you correctly made a BOOTABLE floppy with Windows ... That will remove your old Master Boot Record. ... Now reboot and enter the BIOS as above and change your First Boot ... It must contain the Windows system files ...
    (alt.os.linux.suse)

Loading