Re: BSOD ! - Multiple_irp_comlete_request

Can you please post a copy of the latest Stop Error message?

--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

WinsorRob wrote:
Hi Gerry,

Thanks again for the reply.
Unfortunatly the BSOD has reoccured !, but not with the driver issues
I previoulsy highlighted i.e. no more yellow exclaimations, but still
the BSOD. So, I need to try some of the other things. Did run a
driver update check, there are a few news ones but nothing critical
in my view. Also remembered I had to swap my monitor from an HP
(failed) to a Compaq; but it is down as plug and play and working ok.
Any further ideas welcomed ?

Meant to say last time, I have been running PC Tools Registry
mechanic on a weekly basis for a couple of years and have not had an
issue; but will stop now as the view seems to be XP can take care of
it on its own.

Merry Christmas to all
WinsorRob








"Gerry" wrote:

Rob

The purpose of the exercise was to eliminate the BSOD, If you have
done that then job done. Drivers being unsigned does not mean
anything is wrong. It's just if you are trying to identify one
creating a problem it highlight a few to look at in more detail.

Well done and thanks for reporting the outcome.


--
Seasons greetings.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

WinsorRob wrote:
Hi Gerry and everyone whom has posted replies (many thanks)

The links were good explanations - pointing to a driver
issue/conflict.

I havnt made any hardware changes recently. But on checking drivers
I had two with issues, creative soundblaster (external card), mising
driver and a USB hub. Resolved the former by disabling then restart;
which also seem to cure the USB hub. No BSOD on that restart !

Also ran sigverify.exe. Got the following unassigned:
a3d.dll driver version 2.9.0.0
sfman32.dll 5.12.1.130
intels51.sys 4.28.5.0
ad2kgelp.ini none
ad2kregp.dll 7.0.5.0
ad2kuigp.dll 7.0.5.0
adpdf.ppd none

Should I be concerned about these ?

Cheers
WinsorRob




"Gerry" wrote:

Rob

Background information on Stop Error message:
http://msdn2.microsoft.com/en-us/library/ms793442.aspx

In practice, it is usually a hardware driver issue.
http://aumha.org/a/stop.htm

A Registry Cleaner should not be used:
http://aumha.net/viewtopic.php?t=28099

What hardware changes have you recently made?

Are there any yellow question marks in Device Manager? Right click
on the My Computer icon on your Desktop and select Properties,
Hardware,Device Manager. If yes what is the Device Error code?

Try Start, Run, type "sigverif.exe" without quotes and hit OK. What
drivers are listed as unsigned? Disregard those which are not
checked.

Please post copies of all Error and Warning Reports appearing in
the System and Application logs in Event Viewer for the last boot.
No Information Reports or Duplicates please. Indicate which also
appear in a previous boot.

You can access Event Viewer by selecting Start, Control Panel,
Administrative Tools, and Event Viewer.

A tip for posting copies of Error Reports! Run Event Viewer and
double click on the error you want to copy. In the window, which
appears is a button resembling two pages. Click the button and
close Event Viewer.Now start your message (email) and do a paste
into the body of the message. Make sure this is the first paste
after exiting from Event Viewer.


--



Hope this helps.

Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~

WinsorRob wrote:
Keep getting the above BSOD on start up.
If I then reset at start again its ok.
Tried restore to period when it was ok, to no avail.
No luck with registry cleaners, virus checks et-al.
Loked at knowledge base, cant see anything that fits my
hardware/software configuration.
Any ideas very welcome.

STOP
0x00000044, 0x821707E8, 0x00001B90, 0x00000000, 0x00000000


.