Re: FTP behind router

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Read in the manual of your router how to set up port forwarding.
Disabling the firewall will do you no good; re-renable it and set it up
properly to allow traffic to your ftp server as per the port forwarding
instructions in the manual.








"Paul Smith" <teknologix007@xxxxxxxxx> wrote in
news:es79l2KJIHA.4584@xxxxxxxxxxxxxxxxxxxx:

hello

i have a setup were computers are connected to a central router which
the latter is then connected to an adsl modem. i am hosting an ftp on
one of these computers but for obvious reasons i cannot access it due
to the router's nat and firewall.

i have disabled firewall but nothing else...

what can i do to allow access to my ftp server? port forwarding?
thanks





--
*Reply to newsgroup please.
*Your mileage may vary.
*Spelling/Grammar errors free of charge.
.

Relevant Pages

  • Re: media center extender will not work!!!
    ... I doubt your router is what's causing ... connect your MCX directly to your PC using a cross-over Ethernet cable; ... >>> I first disabled my macafee firewall and was using the windows ... I have tried disabling both firewalls and get ...
    (microsoft.public.windows.mediacenter)
  • Re: Success With Windows98 BUT
    ... green light on the Ethernet card and the routers Ethernet LED ... advantage by disabling it. ... I don't think you need to worry, provided your router has its ... The problem is the unpatched holes in W98 that the firewall and anti ...
    (uk.telecom.broadband)
  • Re: Success With Windows98 BUT
    ... the Ethernet card and the routers Ethernet LED lights. ... advantage by disabling it. ... I don't think you need to worry, provided your router has its firewall ... The problem is the unpatched holes in W98 that the firewall and anti virus ...
    (uk.telecom.broadband)
  • RE: Remote Assistance
    ... functionality of the new router. ... you want to have two levels of firewall protection -- one software ... I would not suggest disabling the router firewall. ... Remote Assistance might have been not working ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Windows Firewall
    ... does not work try disabling startup items. ... ipsec service or Windows Firewall service if you are not running SP2.. ... The router could be the problem if it is blocking ...
    (microsoft.public.win2000.security)