Re: USB to IDE fails to install




Check out if the disk is jumpered as 'Master', these
adaptors only works this way.

Uwe


EmyKay wrote:
Hello, and thanks in advance for any appreciated help. I realize that this is an XP forum, but hope someone here knows W2000.
I installed a new hard drive, with the original W2K, with SP4, and have a US 2.0 IDE Adapter trying to hook up the old drive to transfer data (Seems about to crash).
The new hardware installation was run to completion, the system re-booted, but the final installation failed because the driver failed. If anyone knows what I should do next, pleeeease advise. It came with a small disc that has driver for W98 only, and can not find the manufacturer's name. My question is, is there any place to download a generic driver for these adapters? Thanks again. EmyKay

.



Relevant Pages

  • RE: USB to IDE fails to install
    ... Have you tried going to the Windows Update site for drivers. ... If you rightclick the old driver for win98, the Properties of the file might ... IDE Adapter trying to hook up the old drive to transfer data (Seems about ... The new hardware installation was run to completion, the system re-booted, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Maxtor SATA Primary & WinXP...Wont install...
    ... That's how I managed to "misplace" the driver cd & manual for my brand ... It's an ASUS P4S800D-X + my hubby bought me a new MAXTOR SATA ... "Setup did not find any hard disk drives installed in your computer. ... Early in the installation of Windows XP you will see a brief message ...
    (microsoft.public.windowsxp.hardware)
  • scsi vhci driver and QLA2310, multi-path
    ... Hello I have installed qla2310 adapter in sunfire with solaris 8. ... the installation of driver for QLA2310 there I can see disks on the ... more than one path to the disk. ... SFS_base_packages.S8.tar.Z in which is vhci driver but it was not ...
    (comp.arch.storage)
  • scsi vhci driver and QLA2310, multi-path
    ... Hello I have installed qla2310 adapter in sunfire with solaris 8. ... the installation of driver for QLA2310 there I can see disks on the ... more than one path to the disk. ... SFS_base_packages.S8.tar.Z in which is vhci driver but it was not ...
    (comp.sys.sun.hardware)
  • Need help with driver installation please!
    ... Hi can I please get some assistance with installing an acx100 driver to ... what it means by installation directory). ... The kernel version can be obtained using "uname -r", ... its safe to ignore this warning) and the card ...
    (comp.os.linux.networking)