Re: WinSock Problem
- From: Andyve <Andyve@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 15 Nov 2007 05:36:00 -0800
i have pretty much the same problem except that i am able to make an https
and ftp connection. the bigger issue is that on reboot i am able to access
the internet for about 15 minutes, intially vey good and then the connection
slows down to nil and i get the same error reports from the diagnostic tool.
i can send and receive mail at any time.
i have tried all the suggestion nass but it does not help. i have installed
a port reporter but it is not picking up anything that appears to be blocking
port 80 after this time period.
i have uninstalled my A-V without success and also re-installed ie7. have
deleted the winsock reg entries but had to restore working entries frim
another computer to get my nic working again. i have used various winsock and
lsp fixes and still the problem exists. i also re-applied sp2 and the time i
m able to access the internet went form 2-5 minutes to about 15 minutes.
is there perhaps another way to reset/delete and recreate the winsock
catalog without using the cmd line? my diagnostics error msg says "not all
base provder enties can be found in the winsock catalog". i had a few vpn
programs installed to test but have uninstalled them. the port reporter keeps
on reporting that my wsus server is not available but i have unistalled this
a long time ago. i run reg mechanic every time time i reboot but this does
not appear to have cleared the wsus server issue. i do not think the wsus has
something to do with it but i am grasping at ANY possibility right now.
any help would be appreciated
Andy
"BH2" wrote:
Thanks for the Help Guys it is appreciated, will try it out.
Regards
Bob
"nass" <nass@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:D29D9519-C36A-4178-82F0-1A77894DBD78@xxxxxxxxxxxxxxxx
"BH2" wrote:
Hi Guys,
having problems connecting to some of my shortcuts in my systems tray,
for
instance ebay, when I click it, it tells me the following, which select
windows to reset the Winsock catalogue, and reboot, but the problem is
still
there, would appreciate any advice on this problem
Thanks Guys
Regards
Bob
Network diagnostics for Windows Xp
Windows has detected a problem with the Winsock provider catalogue on
this
computer. This catalogue allows programs to communicate with this
computer
across the network. Would you like windows to reset the catalogue to the
default configuration
Last diagnostic run time: 09/15/07 09:05:26
WinSock Diagnostic
WinSock status
info All base service provider entries are present in the
Winsock catalog.
info The Winsock Service provider chains are valid.
error Provider entry MSAFD Tcpip [TCP/IP] could not perform
simple loopback communication. Error 10022.
error Provider entry MSAFD Tcpip [UDP/IP] could not perform
simple loopback communication. Error 10022.
error Provider entry RSVP UDP Service Provider could not
perform
simple loopback communication. Error -1.
error Provider entry RSVP TCP Service Provider could not
perform
simple loopback communication. Error -1.
error A connectivity problem exists with an installed LSP.
Network Adapter Diagnostic
Network location detection
info Using home Internet connection
Network adapter identification
info Network connection: Name=1394 Connection, Device=1394
Net
Adapter, MediaType=LAN, SubMediaType=1394
info Network connection: Name=1394 Connection 2, Device=1394
Net
Adapter #2, MediaType=LAN, SubMediaType=1394
info Network connection: Name=Local Area Connection 3,
Device=NVIDIA nForce Networking Controller, MediaType=LAN,
SubMediaType=LAN
info Ethernet connection selected
Network adapter status
info Network connection status: Connected
HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity
warn HTTP: Error 12029 connecting to www.microsoft.com: A
connection with the server could not be established
warn HTTPS: Error 12029 connecting to www.microsoft.com: A
connection with the server could not be established
warn FTP (Passive): Error 12029 connecting to
ftp.microsoft.com:
A connection with the server could not be established
warn HTTP: Error 12029 connecting to www.hotmail.com: A
connection with the server could not be established
warn HTTPS: Error 12029 connecting to www.passport.net: A
connection with the server could not be established
warn FTP (Active): Error 12029 connecting to
ftp.microsoft.com:
A connection with the server could not be established
error Could not make an HTTP connection.
error Could not make an HTTPS connection.
error Could not make an FTP connection.
Go through these cleaning steps to see or get a clear opinion on how
clean your machine is:
= Click Start >> Control Panel>>Network and Internet Connections >> Double
click Internet Options.
On the IE properties windows you will see these Tabs:
General | Security | Privacy | Content | Connections | Programs |
Advanced.
Under General Tab clear your History, Internet Files and Cookies.
Then click on Advanced tab and scroll down to under the Browsing Option:
[&] Browsing
[ ] Enable Third-Party browser extensions (Req Rest) uncheck this box.
[ ] Disable script Debugging (internet Explorer) <= check this box
[ ] Disable Script Debugging (Other) <= check this box
Then click on Programs Tab and click Manage Add-Ons and Disable all non
Verified Add-Ons (You should Renable them later one-by-one and see the
culprit and update it or remove it.
How to manage Add-Ons:
http://support.microsoft.com/kb/883256
2.... And also for malware from here:
http://onecare.live.com/site/en-gb/default.htm?s_cid=sah
http://onecare.live.com/standard/en-gb/default.htm
Run a scan from here on-line:
http://www.sophos.com
http://www3.ca.com/securityadvisor/virusinfo/scan.aspx
http://security.symantec.com/sscv6/default.asp?productid=symhome&langid=ie&venid=sym
Download Avast Cleaner from here:
http://www.avast.com/eng/avast-virus-cleaner.html
Lots of tools to download and disinfect your machine:
http://www.bitdefender.co.uk/site/Downloads/browseFreeRemovalTool/
http://free.grisoft.com/doc/5390/lng/us/tpl/v5
Open a run command and type in:
ipconfig /flushdns click [OK]
ipconfig /renew click [OK]
netsh winsock reset click [OK]
or you can use this winsock fixer:
http://www.nasstec.co.uk/tools.html
Execute and t will prompt you to restart, please do so. and see if your
issue or part of it will resolve.
HTH.
nass
---
www.nasstec.co.uk
- Follow-Ups:
- Re: WinSock Problem
- From: nass
- Re: WinSock Problem
- Prev by Date: Re: 2nd HDD not detected in windows
- Next by Date: Re: How to cover my tracks? I USE PORN A LOT
- Previous by thread: Windows upate corruptting files (maybe) after repair operation
- Next by thread: Re: WinSock Problem
- Index(es):
Relevant Pages
|
|