Re: How to restore a full Windows Backup on new drive with all set
- From: "Ricky" <rsjoiner@xxxxxxxxxxxxxxxxxxxx>
- Date: Wed, 3 Oct 2007 17:16:00 -0500
In XP Pro you have to disable simple file sharing to see the security tab.
"Luc" <Luc@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:297ABFED-63D5-4651-B17A-62512B7D385F@xxxxxxxxxxxxxxxx
This is XP Pro. Under new Windows install on new C: drive, Security Tab
does
not appear on folder Options (on the restored private folder that is now
not
accessible and actually shows "folder is empty" when pointer is over it),
folder cannot be dragged to shared folders; "make this folder private"
checkbox is unchecked, grayed and not accessible. Old OS on bad drive is
now
drive D: and new OS install plus backup restored is on new C: drive; both
are
bootable. The original folder is still accessible when running Windows on
D:
but cannot be copied onto same folder (that can't either be deleted) on
new
C: drive.
For the registry and restoring of settings question, should I try to
generate an ASR disk of the old OS to restore onto the new install (if not
available running on D:, can it be done from C:?)? Should I just erase all
C:
and do clean resinstall or first try repair install on both drives?
Thanks!
"Patrick Keenan" wrote:
"Luc" <Luc@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FEBA3AD4-8075-41DC-ADE2-1FFAE85109A2@xxxxxxxxxxxxxxxx
Thanks for your fast reply. Yes it was ntbackup, but no floppy. The
old
drive is untouched, except for what was corrupted and what chdsk
deleted.
Is
there a way to try to salvage the relevant registry files (maybe
running
windows from the new drive)? Regarding the "Take Ownership" for the
private
folder (not encrypted) that was My Documents I tried but the options
are
not
accessible from the menus and/or choices.
Is this XP Home or Pro? It matters, because in Home the security
settings
can only be reached in Safe Mode.
Yes, it should be possible to cobble together registries from the old
drive,
adapting the procedure at the link below - to be frank I've never
actually
recovered in this way, though I have used the procedure in other ways.
http://support.microsoft.com/kb/307545
You would have to do this either from the Recovery Console, set to allow
access to all folders and drives, or using a Linux boot disk, or by
hosting
the drives in another system.
However, if you backed up and restored a damaged Windows install, you
should
at very least do a repair install.
HTH
-pk
"Patrick Keenan" wrote:
"Luc" <Luc@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:52B56362-CF39-4B66-B296-74B870B2C578@xxxxxxxxxxxxxxxx
- My C: drive failed and PC would constantly restart after starting
to
load
windows. Very brief blue screen had message: A problem has been
detected,
... run CHKDSK /F to check for hard drive corruption, ...
- Using OEM XP Pro SP2 install CD, ran chkdsk which repaired most of
it
(and
cleared a bunch of files put in the deleted files folder??).
Windows
starts,
but lots of programs do not start or malfunction, including windows
explorer
which does not allow to paste copied files and Windows Backup not
starting
anything.
- Thankfully (somewhat), I had made a full Windows Backup before
failure
on
an external 300GB Firewire HDD.
- Since backup (for restoring) could not be run from original C:
(neither
apparently available on XP Pro install CD), I installed new HDD and
installed
OEM XP (had to specify one "user"), drivers, and all windows updates
from
internet. I also installed the "bad" C: drive as 2nd drive to be
able
to
access it or boot from it if needed.
- after doing backup restore from the external drive, including all
options:
keep all security settings, etc. and overwriting all files,
- desktops and settings for 4 previous users (different
than
generic "user" used at new install) are not there
- programs do not appear on "user" desktop but on
Start/Programs, do not start and give error message "need to be
reinstalled"
- and main problem - private folders are copied but NOT
accessible.
I there a problem with the backup? What is the best (is there a?)
procedure
to restore the backup and keep all settings? Thank you!
It sounds like you are using XP's ntbackup, backed up all files (or so
it
seemed) but did not use ASR - you were not prompted for a floppy
disk.
This would suggest that various registry files were not backed up
(hence
the
system doesn't know about the software installs), or that what you
backed
up
were damaged versions.
As to the private folders - if they were restored, you just need to
Take
Ownership of them to gain access.
http://support.microsoft.com/kb/308421
Encrypted folders can be another story entirely, a story that seldom
has
a
happy ending.
Some people have good results with ntbackup. Many others don't, and
so
other imaging software can be advisable.
If you restored to another drive and the original drive is untouched,
you're
probably in better shape.
HTH
-pk
.
- Follow-Ups:
- References:
- Re: How to restore a full Windows Backup on new drive with all setting
- From: Patrick Keenan
- Re: How to restore a full Windows Backup on new drive with all set
- From: Luc
- Re: How to restore a full Windows Backup on new drive with all set
- From: Patrick Keenan
- Re: How to restore a full Windows Backup on new drive with all set
- From: Luc
- Re: How to restore a full Windows Backup on new drive with all setting
- Prev by Date: Re: laptop just freeze after bios update
- Next by Date: Re: audio streams, downloads suddenly started cutting out
- Previous by thread: Re: How to restore a full Windows Backup on new drive with all set
- Next by thread: Re: How to restore a full Windows Backup on new drive with all set
- Index(es):
Relevant Pages
|
