RE: NTLDR is missing - Press Ctrl+Alt+Del to restart





"Dan Oakes" wrote:

I got the "NTLDR is missing - Press Ctrl+Alt+Del to restart" message
when I rebooted my computer the other day. I then used my XP install
disk to boot up and went to the cmd prompt to see what files were
missing. boot.ini and ntdetect.com were in there but the NTLDR file
wasnt so I copied it onto a floppy disk and copied it onto the C:
drive, rebooted and it still didn't work. So then I tried to boot from
the XP install disk again and it gave me an error msg: "Utility
Partition not found - Press any key to boot system...". And then of
course, I hit a key and got the "NTLDR is missing" message again and I
havent been able to get to the command prompt since.

Has anyone seen this before?

Thank You,
-- Dan


System Restore may bring things back to life, if not try these Q & A on this
link:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?query=NTLDR&cboDiscussionGroup=en_US_91a15a1e-b269-4291-b6b4-dc2d504ce9ef%3Amicrosoft.public.windowsxp.general%3Aen%3AUS%3A%3A%3A%3A&=Go&dg=microsoft.public.windowsxp.general&cat=en_US_91a15a1e-b269-4291-b6b4-dc2d504ce9ef&lang=en&cr=US&pt=&catlist=&dglist=&ptlist=&exp=&sloc=en-us
http://support.microsoft.com/kb/320397
Boot up with your CD in the CD Rom and when you presented with Windows Setup
Options:
1- Install Windows
2- Repair existing copy
3- Quit
Select 2 by Pressing R on your keyboard, on the Command Prompt type:
C:\Windows>CD.. Hit [Enter..] on your Keyboard
on the new Prompt type this:
C:\>
copy X:\i386\ntldr c:\ where X is the Drive Letter for your CD-Rom
copy X:\i386\ntdetect.com c:\ " " "
Please type one at a time click/Hit [Enter..]
You may need to rebuild your Boot.ini type this on the Prompt:
C:\>Boot.ini click Enter and you will see your Boot.ini you can Edit it or
if was intact leave as is, the boot.ini will look like this, be aware this
for XP Home so if you have XP pro:
[boot loader]
timeout=5
default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Home
Edition" /fastdetect
You will get Boot Indentifier: Enter this " Microsoft Windows XP Home Edition"
Boot Loader: Enter this" /fastdetect"
When you finished type: reboot (I'm not sure if it is right you can Type ?
to get the list of commands and see if reboot is one) or Exit.
HTH.
Please let us know.
Regards,
nass
-----
www.nasstec.co.uk
.



Relevant Pages

  • Re: Cant set pagefile WinXP Home SP2 (RESOLVED!!)
    ... The download allowed me to create a boot disk with the ntfs4dos utility on it. ... A simple reboot and I could change the virtual memory settings to system managed. ... It took a utility that works without Windows facilities for disk access and control to delete the file. ...
    (microsoft.public.windowsxp.help_and_support)
  • SUMMARY : Sun-FireV210 hanging on reboot/boot from OK prompt
    ... The theory was that the disk was ok from a cold boot but failed to properly ... I swapped out the disk, replacing it with a new one and the problem was still ... this be causing it to seemingly lose connection on a reboot or boot, ... Any help is very appreciated and I will, as usual, summarise. ...
    (SunManagers)
  • Re: Dual Boot Sweet Tip
    ... > set Boot from CD as the first general boot device ... > 5a Leave the Windows CD in the Optical Drive and reboot take care not to ... > into the master Disk ... > to my Gigabyte motherboard and Award bios, but the system will work,;less ...
    (microsoft.public.windowsxp.setup_deployment)
  • Re: hard drives dying
    ... Does it boot off a regular Win 98 boot diskette even?.. ... > reboot, it says incorrect system disk, remove and press any key. ...
    (microsoft.public.security.virus)
  • Interesting side note Re: ntloader missing....help!
    ... during all this trouble I took the disc to my house to see if it would boot on my computer which it did. ... (before you ask his BIOS doesn't support booting to the XP disk) ... After everything was over and it had us reboot and XP was up and running on the new drive, we switched the cable n the drive so the ... I just remembered...we had previously tried to load 98 on the new drive but had to abort when he realized he left his certificate at the ex-wife's house. ...
    (microsoft.public.windowsxp.basics)