Re: How can I disable/uninstall a 2nd copy of xp?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



If I'm reading the microsoft support information this applies to upgrades
from an OS other than XP, i.e., from 98 or 2000. This may not be the answer.
Thanks for trying.

"Al Can Help" wrote:

thanks db....I searched with a number of different phrases for an answer in
their db. I'll give this a try and I truly appreciate you having the answer
handy!
a

"´¯`·.. ><)))º>`" wrote:

here is a link with some
helpful info:

http://support.microsoft.com/kb/303661

seems that you might have to
log into the undesired o.s. for
the last time to do the above.

afterwards, you may or may
not be able to boot into the
new o.s.

if not, then simply boot with
the windows setup cd, skip the
install and instead go into the
recovery console and at the
prompt run:

fixboot
fixmbr

-db
"Al Can Help" <AlCanHelp@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:636125BA-8844-4099-A4CA-5C9CA73DB05B@xxxxxxxxxxxxxxxx
Long story short, a technician said I needed to re-install windows
after
replacing my motherboard with the same model, which should not be the
case.
He had the SATA cable in the wrong place. I re-installed windows and
was
having a few difficulties (couldn't find other drives I had in the
box) which
were plugged into a PCI SATA card. Saw his error and corrected it and
my
original desktop/windows XP
installation/configuration/programs...everything
is where it should be.
Question is: How do I disable or uninstall that 2nd copy of XP on my
C
drive? I restarted once and it used that installation to boot. It's
sucking
up space, as you know, as well.
Thanks!
Al


.



Relevant Pages

  • Re: XP Pro wont boot, safemode wont help, recovery console doesnt h
    ... Win XP Pro installed on a 300GB SATA drive, ... When trying to boot it gets to the standard Windows logo and after ... new install, which AFAIK would wipe the drive). ... the SATA HDD listed in Device Manager in the "Disk drives" section? ...
    (microsoft.public.windowsxp.general)
  • Re: XP Pro wont boot, safemode wont help, recovery console doesnt h
    ... Win XP Pro installed on a 300GB SATA drive, ... When trying to boot it gets to the standard Windows logo and after ... new install, which AFAIK would wipe the drive). ... drives" section? ...
    (microsoft.public.windowsxp.general)
  • Re: Windows Xp crash
    ... Message came up "Disk Boot failure.: ... indicated that all drives had no disk inserted. ... I tried about a week ago to install Windows 7 on the second hard ...
    (microsoft.public.windowsxp.hardware)
  • Re: Installing XP Pro on Hard Drive
    ... Windows 2000 Pro, but I want to install a retail version of Windows ... and set to boot from a Windows 98SE startup floppy. ... By the way, the BIOS recognizes both optical drives, and even in Device ...
    (microsoft.public.windowsxp.help_and_support)
  • Trouble installing Redhat 9.0 on Promise FastTrak100 TX2 RAID controller, RAID1 mirrored - solved
    ... a computer with mirrored 120 GB IDE drives on a Promise ... installed the Promise driver for Windows, ... refuses to boot to the Linux boot partition, ... The next time I tried the install, ...
    (comp.os.linux.hardware)