Re: Format & Re-Install (SATA)
- From: "Anna" <myname@xxxxxxxxx>
- Date: Tue, 5 Jun 2007 13:26:53 -0400
"James" <minorkeys@xxxxxxxxx> wrote in message
news:eSdyCiupHHA.2044@xxxxxxxxxxxxxxxxxxxxxxx
Here's my situation. I'm running XP Pro off of a primary SATA drive.
It's getting to the point where I really want to format it and
reinstall. With an old IDE drive, I'd simply boot off of the CD, format
and call it a day. However, I'm unable to load whatever drivers are
necessary for my motherboard in order that the setup program will
recognize my SATA drives. So I'm getting Unknown Disk x 2 when it asks
me where to install it (I have another SATA drive that's blank).
I have an nForce 4 motherboard and I tried throwing the drivers for it
on a blank CD in multiple configurations and loading the drivers, but it
never found them and/or knew what to do with them.
Are there any alternatives that I haven't considered? I'm losing my
mind here. This used to be so simple.
Thanks
"David B." <brooks.dj@xxxxxxxxxxxxxxxxxx> wrote in message
news:7A4EC983-D062-433A-877C-35215112BF13@xxxxxxxxxxxxxxxx
When installing XP, and you need to provide 3rd party drivers using the
F6 option during setup, they must be on floppy, the XP installation will
look no where else.
"James" <minorkeys@xxxxxxxxx> wrote in message
news:%23PSdKu3pHHA.4196@xxxxxxxxxxxxxxxxxxxxxxx
That's convenient since I haven't had a floppy drive since roughly 2002.
So I can never install XP ever again. Charming.
James:
(We're assuming that installing a SATA controller driver is the problem
here).
This F6 process involving the installation of SATA drivers through the use
of a floppy disk has been and continues to be a near-universal misery. Why
the industry developed this awkward process has been a mystery to many of
us - especially when a more simple & straightforward process of including
the SATA controller driver on the motherboard's installation CD (or a
separate CD) was available. And why they came up with this process during a
period when it was obvious to all that the floppy disk drive was becoming
obsolete and rarely installed on new computers is incomprehensible. So your
frustration over this issue is quite understandable.
Fortunately, as time goes by, there will be less & less need to undertake
the F6 process to provide a SATA driver. Virtually all of the newer
motherboards and many of the older boards come with (in effect) integrated
SATA drivers. But, as you've learned, the use of a floppy disk to install a
SATA controller driver is still necessary in many cases.
There have been a number of reports purporting to detail a process obviating
the need to use the F6 floppy disk routine to install the SATA driver and
instead incorporating the necessary driver info in a slipstreamed XP
installation CD. Frankly in the few times that we've used one or another of
these alternate processes we haven't been successful. But since we always
have a floppy disk drive available, we haven't had a great deal of
experience with the alternate processes. And a number of users have reported
that these alternate processes do indeed work.
Anyway, for what it's worth take a look at this one...
http://unattended.msfn.org/unattended.xp/print/web/36/SESSID=dcf06ecf6f56c19b1a91c3245074b6e9
And good luck...
Anna
.
- References:
- Format & Re-Install (SATA)
- From: James
- Re: Format & Re-Install (SATA)
- From: David B.
- Re: Format & Re-Install (SATA)
- From: James
- Format & Re-Install (SATA)
- Prev by Date: Re: Reinstall Windows XP Service Pack 2
- Next by Date: Re: data backup to external hard drive
- Previous by thread: Re: Format & Re-Install (SATA)
- Next by thread: default to DETAILS view instead of LIST in FILE > OPEN applet
- Index(es):
Relevant Pages
|
