Re: Where will I find the drive volume label?


sylviesinc <sylviesinc@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Hello,

I am trying to convert my external HD into ntfs as advised, by running
cmd
then the command "convert F:/fs:ntfs"...
(SNIP)



"Ron Martell" wrote:
Have you ensiured that the partition boundary is properly aligned for
NTFS? If it isn't then the converted drive will use a very
inefficient 512 byte cluster size.

See the late MVP Alex Nichol's article on converting FAT32 to NTFS:
http://www.aumha.org/win5/a/ntfscvt.htm

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP (1997 - 2008)
On-Line Help Computer Service
http://onlinehelp.bc.ca


"sylviesinc" <sylviesinc@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:81275FEB-E641-4D04-A871-72DE96D04F52@xxxxxxxxxxxxxxxx
Thanks for this. My PC doesn't have a floppy drive and the article you
referred me to requires that you make a floppy then boot from it so I
don't
think I'll bother trying to convert my external HD after all.


sylviesinc:
First of all I assume the "external HD" you're referring to is a USB
external HDD. Presumably you're using (or plan to use) that device for
storage and/or backup purposes.

Assuming that is so, as a practical matter the only significant reason for
converting the present file system on the external HDD (I'm assuming it's
the "normal" FAT32 file system that most manufacturers install on their
external HDD devices) is to provide capability of copying/moving files onto
that external drive that are 4 GB or larger. The FAT32 file system cannot
handle those extremely large files, but the NTFS file system can.

While by & large the NTFS file system is considered a more efficient &
secure file system than the FAT32 one, that problem re the possibility of
establishing the 512 byte cluster size as a consequence of the conversion
process (rather than the more desirable 4 kb size) is really significant
(although you might even find some disagreement about this) where the HDD
involved is an internal HDD, e.g., your day-to-day working HDD.

The bottom line in all this is that there's really no harm in converting the
file system on your USB external HDD from its present FAT32 to NTFS using
the normal convert command as you indicated and in my opinion you needn't be
concerned over the possibility of creating 512 kb file clusters on that
external HDD.
Anna


.

Relevant Pages

  • Re: FAT to NTFS
    ... Windows Help? ... I am doing a project for converting one file system to another..(FAT ... to NTFS as well as NTFS to FAT)... ...
    (microsoft.public.windowsxp.basics)
  • FAT to NTFS
    ... I am doing a project for converting one file system to another..(FAT ... to NTFS as well as NTFS to FAT)... ... Lukin 4wrd 4 ur co-operation... ...
    (microsoft.public.windowsxp.basics)
  • Re: NTFS volume or FAT32???
    ... Open the command line interface by entering CMD in the Run command ... The downside to converting to NTFS, as opposed to installing on a clean NTFS ... > Norton disc doctor keeps telling me my file system is a non NTFS volume. ...
    (microsoft.public.windowsxp.general)
  • Re: converting hard drive to ntfs
    ... I am having a similar problem, and I already tried converting. ... it says it's already NTFS. ... properties, it says file system is RAW, and the capacity is 0 bytes. ... BIOS, and it's reading the drive correctly, and in disk manager it is ...
    (microsoft.public.win2000.file_system)
  • Re: XP Less Secure than 98 for Sharing Files
    ... >folders & shares such that I don't have to bother with individual ... and requires NTFS; ... >> can't formally scan for malware, ... recovery and non-automated file system repair. ...
    (microsoft.public.windowsxp.security_admin)