Re: system file checker

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From my registry...
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
Value Name: SourcePath
Data Type: REG_SZ
Value data: D:\I386

D:\I386 indicates the I386 folder on my XP CD. D:\ is my CD drive.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Value Name: SFCDisable
Data Type: REG_DWORD
Value data: 0 or 1 or 2
0 means do not scan protected files after restart. (Default value)
1 means scan all protected files after every restart (set if sfc /scanboot is run).
2 means scan all protected files one time after a restart (set if sfc /scanonce is run).

Value Name: SfcQuota
Data Type: REG_DWORD
Specifies the maximum disk space that the Windows File Protection file cache can use.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
is
[+] HKEY_LOCAL_MACHINE
[+] SOFTWARE
[+] Microsoft
[+] Windows NT
[+] CurrentVersion
[+] Winlogon

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:eY6mJmrfHHA.208@xxxxxxxxxxxxxxxxxxxx,
Debbie Graham <jgraham1@xxxxxxxxxx> hunted and pecked:
Wes I don't have this in my registry, I'm I supposed too? I don't have
anything saying windows file protection or winlogon in the Windows NT
part. SUMMARY
The following registry key is the primary location for registry settings
for Windows File Protection/System File Checker:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
In addition, Windows File Protection/System File Checker settings may also
be located in the following registry key:
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Windows File
Protection
Back to the top

MORE INFORMATION
When Windows starts up, the Windows File Protection service synchronizes
(copies) the WFP settings from the following registry key
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Windows File
Protection
to the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon
Therefore, if any of the following values are present in the
HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\Windows File
Protection key, they will take precedence over the same values under the
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon
key.

Debbie








"Wesley Vogel" <123WVogel955@xxxxxxxxxxx> wrote in message
news:enF84FrfHHA.4980@xxxxxxxxxxxxxxxxxxxxxxx
Debbie,

Since you do not have the %windir%\ServicePackFiles folder, Windows File
Protection is going to want to look for %windir%\system32\dllcache
folder.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

Try changing ServicePackSourcePath to C:\

Note:
%windir% is an environment variable that is the location of the system
folder.

Typing or pasting %windir% into the Start | Run box opens to the Windows
folder on whatever drive it is located. I.e. C:\WINDOWS or C:\WINNT.

Windows XP can be installed in either WINDOWS or WINNT.

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:e$2At%23VfHHA.2396@xxxxxxxxxxxxxxxxxxxx,
Debbie Graham <jgraham1@xxxxxxxxxx> hunted and pecked:
Wes I just tried that and it still tells me I have the wrong CD. Is
there
any way I can extract the service pack files onto my C windows
directory?


Debbie


"Wesley Vogel" <123WVogel955@xxxxxxxxxxx> wrote in message
news:eIOOLbTfHHA.4364@xxxxxxxxxxxxxxxxxxxxxxx
Debbie,

Load your XP CD into your CD drive. Wait a while for Windows to read
it,
a minute or so. Then type sfc /scannow in Start | Run.

I just tried this. If I ran sfc /scannow before I loaded the CD into
the
drive I got this message...

Insert your Windows XP Professional Service Pack 2 CD now.

I have XP Pro by the way.

If I loaded the CD into the drive and waited a bit before running sfc
/scannow, I had no problem.

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:%23bWhjpRfHHA.596@xxxxxxxxxxxxxxxxxxxx,
Debbie Graham <jgraham1@xxxxxxxxxx> hunted and pecked:
It says windows can not find the service pack files, now what? My
windows
cd already had the sp2 upgrade on it I didn't have to install it from
microsoft.



Debbie


"Wesley Vogel" <123WVogel955@xxxxxxxxxxx> wrote in message
news:OJUJhLRfHHA.2396@xxxxxxxxxxxxxxxxxxxxxxx
Debbie,

Before doing Method 2 below, try this.

Paste the following line into Start | Run and click OK...

%windir%\ServicePackFiles

If the ServicePackFiles folder opens, the proceed with Method 2, you
have
a
ServicePackFiles folder. The ServicePackSourcePath needs to be
changed
to reflect this.

Method 2: Modify the registry to point to the Windows XP SP2 Setup
files Warning Serious problems might occur if you modify the
registry incorrectly
by using Registry Editor or by using another method. These problems
might
require that you reinstall your operating system. Microsoft cannot
guarantee
that these problems can be solved. Modify the registry at your own
risk. 1. Click Start, click Run, type regedit in the Open box, and
then
click
OK.
2. Locate the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

3. In the right pane, right-click ServicePackSourcePath, click
Modify,
type
or paste

%windir%\ServicePackFiles

and then click OK.

from...
You are prompted to insert a Windows XP SP2 CD when you try to run
the
System File Checker tool on a Windows XP SP2-based computer
http://support.microsoft.com/kb/900910

NOTE: The ServicePackFiles folder only exists if you have upgraded
to XP SP2 and SP2 was not included in the original install and the
SP2 upgrade was done by downloading it from Microsoft. The
ServicePackFiles\i386 folder contains the most recently updated
service pack files and is used for Windows File Protection instead
of using the system32\dllcache folder. --
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:OjqqiGIfHHA.2308@xxxxxxxxxxxxxxxxxxxx,
Debbie Graham <jgraham1@xxxxxxxxxx> hunted and pecked:
ok I just rebooted and tried it and it still asks me for the xp sp2
cd. Deb


Debbie Bailey & Thom:
http://www.freespaces.com/debsfelinefine/index.html Free
Wallpapers/Backgrounds: http://debsgraphics.freespaces.com/ "Debbie
Graham" <jgraham1@xxxxxxxxxx> wrote in message
news:%23TxwL%23HfHHA.4552@xxxxxxxxxxxxxxxxxxxxxxx
Hi Wesley,

I did what you wrote and will try it now. Here is a pic of that
other entry. I don't even remember trying jv 16 power tools


Debbie



Hi Debbie,

And you have an extra item, that I cannot read in your picture.

Open regedit and navigate to >>
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

Right click a blank spot in the right hand pane, point to New and
click String Value.

New Value #1 should be highlighted in Blue and available to
rename to ServicePackSourcePath.

Paste or type: ServicePackSourcePath in place of New Value
#1. If New Value #1 becomes unavailable before you can change the
name,
right click New Value #1 and select Rename. Paste
ServicePackSourcePath in and left click a blank spot.

Will look like...
ServicePackSourcePath REG_SZ

REG_SZ is a String Value.

Double click: ServicePackSourcePath type the letter of your
CD drive
in
the Value Data box. Like so D:\ and click OK.

Will look like...
ServicePackSourcePath REG_SZ D:\


Right click a blank spot in the right hand pane, point to New and
click String Value.

New Value #1 should be highlighted in Blue and available to
rename to SourcePath.

Paste or type: SourcePath in place of New Value #1.

If New Value #1 becomes unavailable before you can change the
name,
right click New Value #1 and select Rename. Paste SourcePath
in
and left click a blank spot.

Will look like...
SourcePath REG_SZ

Double click: SourcePath type the letter of your CD drive in
the
Value
Data box. Like so D:\ and click OK.

Will look like...
SourcePath REG_SZ D:\

--------------

Double click that second item, below (Default), highlight the
Value
name
box, hit Ctrl + C to copy it, click Cancel and paste what you
copied
into a
message and post back.

It looks like a GUID number, a number in brackets like {234234}
or it could
be a number in parentheses (234234). I would like to do a Google
search
on
that and see what it is.
---------

I found something similar on a Russian website...

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup
Value Name: (9F1C11AA-197B-494X-BA54-47A8489BB47k)
Data Type: REG_SZ
Value Data: SourceLocator32b

Something to do with a trial period on jv16 PowerTools 2006. If
you
have jv16 PowerTools 2006, that is probably what messed up your
registry, SWAG.

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:%23vek0%238eHHA.1312@xxxxxxxxxxxxxxxxxxxx,
Debbie Graham <jgraham1@xxxxxxxxxx> hunted and pecked:
Looks like I'm missing 2 items there

Debbie


"Wesley Vogel" <123WVogel955@xxxxxxxxxxx> wrote in message
news:uKgSRr8eHHA.4868@xxxxxxxxxxxxxxxxxxxxxxx
Under

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

here is what you should see listed under the name column in the
right hand pane.

(Default)
BootDir
CDInstall
DriverCachePath
Installation Sources
LogLevel
PrivateHash
ServicePackSourcePath
SourcePath

Is anything else missing?

--
Hope this helps. Let us know.

Wes
MS-MVP Windows Shell/User

In news:OmX0Uv7eHHA.5044@xxxxxxxxxxxxxxxxxxxx,
Debbie Graham <jgraham1@xxxxxxxxxx> hunted and pecked:
I don't have this In the right pane, right-click
ServicePackSourcePath in the registry

Debbie

.

Relevant Pages

  • Re: scan for file corruption
    ... Windows XP has the ability to protect itself from system instability caused by ... Windows File Protection is always enabled and allows Windows ... see if there are any corrupt system files using scannow sfc. ... NB - The dllcache folder is extremely important so Windows XP hides it from ...
    (microsoft.public.windowsxp.newusers)
  • Re: system file checker
    ... Since you do not have the %windir%\ServicePackFiles folder, Windows File Protection is going to want to look for %windir%\system32\dllcache folder. ... Typing or pasting %windir% into the Start | Run box opens to the Windows ... Debbie Graham hunted and pecked: ... The ServicePackSourcePath needs to be changed ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: System File Checker question
    ... for Windows File Protection if the folder exists. ... Locate the ServicePackSourcePath value under the following key in the ... Having run sfc /scannow, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: system file checker
    ... Is G:\ a hidden partition on your hard drive that contains the I386 folder? ... If you did copy the I386 folder from the CD to your G: drive, then SourcePath being G:\ should be fine. ... And if G:\ is your CD drive change ServicePackSourcePath to G:\ ... MS-MVP Windows Shell/User ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: system file checker
    ... This file doesn't exist (If this folder exists ... ServicePackSourcePath and Sourcepath set to me G drive, ... MS-MVP Windows Shell/User ...
    (microsoft.public.windowsxp.help_and_support)