Re: safe message mode
- From: "Shenan Stanley" <newshelper@xxxxxxxxx>
- Date: Sat, 24 Mar 2007 17:35:31 -0500
ernestls wrote:
I got a dell monitor with an compaq deskpro modem and since hook up
a black screen appears saying safe mode activate by using the
keyboard but when i push any key on key board nothing happens and
the screen remains black. eventually the screen goes dormant and
when i push a key the safe error message appears. help what do i do
now? the computer was working fine before.
Shenan Stanley Wrote:
Can you give the exact text of the message?
This sounds more like the monitor itself giving you the message -
not the computer.
Have you played with the monitor menus to assure you are telling
it to get signal from the correct input, etc?
ernestls wrote:
The monitor says this: INFORMATION
Monitor is in power save mode
Activate Using PC
That cuts it - the computer is not getting a signal to the monitor. If your
monitor has more than one way to get a signal to it (VGA, DVI, RGB, other?)
then it is very possible your monitor is set to automatically detect what
type is connected and it is doing this incorrectly.
If there is a way to hard-code the monitor to a certain type - do so.
If the monitor only has one input type - you could have adefective cable
(VGA/DVI, etc..)
In other words - try to change the input type the monitor is looking for to
match the computer.
Also - how many outputs does your computer have? Is it dual-monitor capable
or might it have had a built-in video card (on the motherboard) and an
additional one was added later?
--
Shenan Stanley
MS-MVP
--
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html
.
- References:
- safe message mode
- From: ernestls
- Re: safe message mode
- From: Shenan Stanley
- Re: safe message mode
- From: ernestls
- safe message mode
- Prev by Date: System hanging
- Next by Date: Re: System hanging
- Previous by thread: Re: safe message mode
- Next by thread: Re: safe message mode
- Index(es):
Relevant Pages
|