Hd with 2 partitions, back to one only possible?

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: "zero" <repyl@xxxxxxxxxxxxxxxx>
Date: Thu, 15 Feb 2007 13:10:13 -0300

I have HD with 2 partitions C: have SO and progs, and F has data.
I'd like to have only C using the whole disk instead.

C is NTFS and F is FAT32...

If I use an external HD to move there all info in F, can I get back to 1
partition to have SO and software using the whole hd?

Is there a way to do so without reinstalling SO and programs? Any ideas on
how to proceed?

.

Prev by Date: Re: Machine locking up when trying to play videos
Next by Date: Re: Weird error - can't save, program just crashes/disappears
Previous by thread: Re: logon to administrator at bootup fails
Next by thread: Re: no cursor in dialog boxes
Index(es):
- Date
- Thread

Relevant Pages

LVM on SW RAID for sarge - success
... I've just had success migrating Debian Sarge to root on LVM on RAID. ... First make sure the SCSI BIOS boots from the first disk. ... I made reiserfs on all the filesystem partitions and completed the ... The remaining two disks were partitioned and used to create RAID arrays ...
(Debian-User)
Re: Replace SCSI Drive
... from there you can manipulate other hard drives attached to the machine. ... It should 'just work' but watch out that you keep disk devices ... vi-a) Write a BSD partition table into the slice, then set up your required FreeBSD partitions: ... items under the 'Custom Install' to achieve the desired result. ...
(freebsd-questions)
Re: RAMDisk and HardDisk strikes back!
... One disk with only one partition as large as FBA setup; ... Two disk with one or more partitions for each. ... @ 20:32:55.252 #W059 Selecting best compatible driver failed. ... @ 20:53:51.166 #T211 Install Device: Changing registry settings as specified ...
(microsoft.public.windowsxp.embedded)
Re: backups & cloning
... dump unmounted file systems to the system's tape drive. ... The restore program, on the other side of the | pipe, does ... Here's an example (ad1 is source disk, ... Use dump only on unmounted partitions. ...
(freebsd-questions)
Software RAID partitions not detected at boot time with linux 2.6.25.1.
... In my previous bug repor, I was using raid1; now, I am using raid5, as ... device sdc2 operational as raid disk 2 ... The last line shows my raid partitions are detected. ...
(Linux-Kernel)