Re: Dual boot with dos on floppy

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Alexandre.delay wrote:
Hi,

I would like to build a boot floppy disk (which will become a CD after
validation) with MS-DOS on IT.
It would first boot and propose to choose between:
-WinXP (on hard drive)
-DOS (on the floppy)
(The idea is to make a boot CD which would permit to get dos on any
PC and booting XP without having to take the CD/floppy out.)

I made my disk like that:
1) I did format it under XP to get the proper MBR on it.
2) I placed boot.ini, NTDLR and NTDETECT.COM on it so that it
boots and propose to choose.
3) I placed the WinME boot disk files (autoexec.bat, command.com,
config.sys, io.sys...)
4) I extracted the WinME MBR and placed it as BOOTSECT.DOS on the
floppy
Here is my boot.ini
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="WinXP" /fastdetect
/NoExecute=OptIn
A:\BOOTSECT.DOS="DOS" /win95dos

I thought it would be ok (and it works perfect for WinXP), but when I
choose DOS, I got an error on <windows root>\system32\hal.dll

What is wrong with this boot disk?

Thanks for your help

Cheers

Alex

This seems like a lot of work to accomplish nothing. If you want to boot
from DOS insert a DOS floppy and boot from it. If you want to boot from XP
remove the floppy and reset the computer. What could be easier? If you are
using this for troubleshooting multiple pc's then it's a total waste of
time. Most XP installations use NTFS so booting to DOS will get you nowhere.

Kerry


.

Relevant Pages

  • Re: Unable to boot to existing 2003 server
    ... Formatted a floppy using 2003 server. ... Could not read from selected boot disk. ...
    (microsoft.public.windows.server.general)
  • Re: Correctly configuring an old HDD : Miniscribe 3085
    ... Type Boot Cyl Head Sector ... so PM believes the disk starts at and ends at. ... You are booting from a clean floppy - one without the DM ... I needed, it seems, Ontrack's Disk Manager for Miniscribe to get a low-level format at 1170 cyl. ...
    (uk.comp.homebuilt)
  • Re: unable to install XP on new HD
    ... connected to the primary master HD and I was once able to boot to OS XP ... the floppy ... For a boot disk go here: http://www.bootdisk.com/bootdisk.htm and use the ... files and so I have to abort installation. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Rebuilt Mirror Wont Boot
    ... I would not be able to boot from the floppy since it is not on ... I am still at square one with a server that I can boot off a floppy ... I cannot boot the server using the same boot.ini file on the C drive. ... Since disk1 is the disk I used to create the new mirror with disk0, ...
    (microsoft.public.windows.server.general)
  • Re: In the mad and crazy world of home computing . . . (ShowFolder[1]. - Delete Problem)
    ... >>> file in question is not in a temporary internet folder. ... >> If worse comes to worse delete it in DOS... ... Boot with the above diskette which will allow you to access the NTFS ... will not need the disk and any handy startup disk will do. ...
    (microsoft.public.win2000.file_system)