Re: No Devices In Device Manager Even with Plug and Play set to Automatic
Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance
In safe mode, can you query the modem from the phone and modem
settings? does it respond? try pulling it out and putting it in a
different pci slot and see if it is detected next time you boot, I
agree with Sharon, it sounds like it might be shot. Another
possibulity is that the drives managed to corrupt.
-Dan
.
Relevant Pages
- Re: Courier modem configuration
... I have a us courier 56k versus everything external modem. ... You can query the modem with a terminal program, ... the modem's current settings use ATi4. ... you only need to worry about the configuration if you have ...
(comp.dcom.modems) - RE: error message
... Modem specs click on the link and you will find lots of Q and A: ... I will check with your ISP that there DNS and WINs settings are correct, ... or you can Right click your Local Connection in the Network Connections ... "dale" wrote: ...
(microsoft.public.windowsxp.help_and_support) - breakage of setserial in Sarge
... Immediately it asks and suggests 'autosave once'. ... But it doesn't recognise my modem with the correct parameters. ... Now the reboot should be okay. ... settings are default settings, ...
(Debian-User) - Re: Anybody in Australia willing to sub-hire me? (was: How best to implement HashCons in user
... The driver names and associated refnums are: ... // DTR input flow control enable flag ... *** There doesn't seem to be any way to read back these settings so ... modem before starting up the FAX software. ...
(comp.lang.lisp) - Re: Dial-up in XP Pro not available?! HELP!!!
... Open a command prompt, type the following commands and post the results ... It won't even start dialling as if modem wasn't there. ... Even in Network Settings and Connections, ...
(microsoft.public.windowsxp.network_web) |
|
