XP BSOD reboots SP2
- From: "Jeff" <jeep@xxxxxxxxx>
- Date: 16 Aug 2005 19:51:00 -0700
Hello-
I have the following computer components:
AMD 2.8G celeron 32 bit
ASUS p4p800Dx motherboard
512M RAM
Harddrive - tried 2.
The problem:
Several days ago as I was working in Word my computer,
which has been running mostly on with various reboots,
for about 2 years now, suddenly gave me the BSOD. I reboot
(didnt pay attention to what it said thinking it was a fluke),
started up and worked fine for 10 minutes, then froze. Hit reset
and computer would no longer boot. I came back 2 hours later and
turned it on and it boot. Worked fine for a while, then froze. Same
issue, wouldnt reboot after a reset.
Finally it wouldnt boot at all. After about 1 full day of playing
around
got a new p4p800 motherboard and at least I would get a bios screen
now.
The current problem (After reloading XP onto another HD on another
computer
and un-checking 'reboot on failure' in the control panel, is the
following
BSOD:
A problem has been detected and Windows has been shut down to prevent
damage to your computer.
If this is the first time you've seen this Stop error screen,
restart your computer. If this screen appears again, follow
these steps:
Check for viruses on your computer. Remove any newly installed
hard drives or hard drive controllers. Check your hard drive to make
sure it is properly configured and terminated.
Run CHKDSK /F to check for hard drive corruption and then
restart your computer.
Technical Information:
*** STOP 0x0000007B (0xF9E49528, 0xC0000034, 0x00000000, 0x00000000)
Other interesting info:
With XP SP2 reloaded onto new HD (maxtor), this new OS/HD combo works
fine in another PC box (AMD celeron 2.4G, not sure the rest). If I put
same disk in my 'bad' PC box, I get that BSOD above.
Ive swapped the video card, memory, power supply. There arent any
other boards in 'bad' PC box to swap or change out. The only thing
left
is the CPU and it seems to get to 'safe mode' just fine. At this point
Ive spent about 20 hours or so swapping stuff and going back and forth
to
Fry's electronics trying to figure out whats wrong.
Lastly, it would be *awefully* nice of XP NOT TO set the default
behaviour to Reboot on failure so at least we had *SOME* information
about
what the problem was!!! Their answer appears to be, we had a problem,
lets just reboot and it might clear itself up!
Thanks for any help,
Jeff
.
- Follow-Ups:
- Re: XP BSOD reboots SP2
- From: Joshua Smith [MSFT]
- Re: XP BSOD reboots SP2
- Prev by Date: Re: Power Options Will Not Save
- Next by Date: Re: Power Options Will Not Save
- Previous by thread: Win xp restarting all the time
- Next by thread: Re: XP BSOD reboots SP2
- Index(es):
Relevant Pages
|
