Re: Unable to burn DVD's but can Burn CD's
- From: "Mike" <mikevandermerwe@xxxxxxxxxxxxxx>
- Date: Sun, 24 Jul 2005 13:15:34 +0200
Both drives are LG
Did have Nero Info Tool, was downloaded in the Nero 6.6 packet, but did not
now what it was for.
Results of Nero Info Tool
DVD Writer
ID String [1:0] D:\ DT-ST DVDRAM GSA 4081B
Firmware A100
DVD Player
ID String [1:0] E:\ Hl-DT-ST RW/DVD GCC-4521B
Firmware 1.05
Question
Should both firmware's be the same?
Will check LG website.
Will be back later
Mike
"Jaymon" <Jaymon@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:EE12BF4D-CA5B-4978-BE12-42A9790C77B6@xxxxxxxxxxxxxxxx
> No, I don't mean drivers... The firmware is info that is on a chip in the
> unit itself, like a bios chip on the motherboard. Ok, to check your
> firmware
> version go here and get nero info tool.
> http://www.iomagic.com/Firmware/NeroInfotool/NeroInfoTool_221.zip
> and go here to see how to read the drive string and firmware ver.
> http://www.iomagic.com/Firmware/NeroInfotool/neroinfotool.html
> and post your results or go to the recorder drives OEM web site to see if
> a
> firmware update is available.
>
> j;-)
>
>
> "Mike" wrote:
>
>> e reply.
>> "You may need to update the firmware for the RW drive "
>> What is firmware? do you mean drivers?
>> The DVD writer only came with a Nero disk.
>> Mike
>>
>>
>> "Jaymon" <Jaymon@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:391953C4-81EE-4150-90F9-3EB9EC2CB169@xxxxxxxxxxxxxxxx
>> > You may need to update the firmware for the RW drive if updating Nero
>> > fails
>> > to solve the problem. Nero 5.5 works just fine now, after I updated my
>> > firmware.
>> >
>> > j;-)
>> >
>> > "Mike" wrote:
>> >
>> >> help.....I know it's maybe the wrong NG, but could you help or direct
>> >> me to the right one.
>> >> This morning I tried to burn data to a DVD......only burnt the intro
>> >> then
>> >> stopped with a error.
>> >> Tried again ... same thing...
>> >> Virus checked, spyware checked, all OK
>> >> Did a sfc scannow, did a system restore to 2 days ago.
>> >> Tried again, same results.
>> >> Un-installed Nero and removed all traces from registry.
>> >> Reloaded Nero.
>> >> Tried again, same results.
>> >> I can burn to DVD-RW and CD-RW and CD-R but not DVD+ or DVD-
>> >> I am adding the error message, I know its long but in other posts it
>> >> has
>> >> been said that not enough info is given.
>> >> Nothing unusual happened at shutdown last night or bootup this
>> >> morning.
>> >> Problems seem to start at 8:48:15 AM #21
>> >> I don't know how to interpret this data, hoping someone can help.
>> >> TIA
>> >> Thanks again
>> >> Mike
>> >>
>> >> ERROR
>> >> Windows XP 5.1
>> >> IA32
>> >> WinAspi: -
>> >> ahead WinASPI: File 'C:\Nero v6.3.1.13\nero\Wnaspi32.dll':
>> >> Ver=2.0.1.59,
>> >> size=160016 bytes, created 12/16/2003 8:18:06 PM
>> >> Nero version: 6.3.1.13 (Nero Express)
>> >> Recorder: <HL-DT-ST DVDRAM GSA-4081B>Version: A100 - HA 1
>> >> TA
>> >> 0 -
>> >> 6.3.1.13
>> >> Adapter driver: <atapi> HA 1
>> >> Drive buffer : 2048kB
>> >> Bus Type : default (0) -> ATAPI, detected: ATAPI
>> >> CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2
>> >> TA
>> >> 0 -
>> >> 6.3.1.13
>> >> Adapter driver: <xmasscsi> HA 2
>> >>
>> >> === Scsi-Device-Map ===
>> >> DiskPeripheral : Maxtor 6Y080L0 atapi Port 0
>> >> ID 0
>> >> DMA: On
>> >> DiskPeripheral : ST3160023A atapi Port 0
>> >> ID 1
>> >> DMA: On
>> >> CdRomPeripheral : HL-DT-ST DVDRAM GSA-4081B atapi Port 1
>> >> ID 0
>> >> DMA: On
>> >> CdRomPeripheral : HL-DT-ST RW/DVD GCC-4521B atapi Port 1
>> >> ID 1
>> >> DMA: On
>> >> CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 2
>> >> ID 0
>> >> DMA: Off
>> >>
>> >> === CDRom-Device-Map ===
>> >> HL-DT-ST DVDRAM GSA-4081 D: CDRom0
>> >> HL-DT-ST RW/DVD GCC-4521 E: CDRom1
>> >> AXV CD/DVD-ROM G: CDRom2
>> >> =======================
>> >>
>> >> AutoRun : 1
>> >> Excluded drive IDs:
>> >> CmdQueuing : 1
>> >> CmdNotification: 2
>> >> WriteBufferSize: 83886080 (0) Byte
>> >> ShowDrvBufStat : 0
>> >> EraseSpeed : 0
>> >> BUFE : 0
>> >> Physical memory : 767MB (785904kB)
>> >> Free physical memory: 376MB (385640kB)
>> >> Memory in use : 50 %
>> >> Uncached PFiles: 0x0
>> >> Use Static Write Speed Table: 0
>> >> Use Inquiry : 1
>> >> Global Bus Type: default (0)
>> >> Check supported media : Disabled (0)
>> >>
>> >> 22.7.2005
>> >> CD-ROM (MP3)
>> >> 8:45:30 AM #1 Text 0 File Isodoc.cpp, Line 6065
>> >> Iso document burn settings
>> >> ------------------------------------------
>> >> Determine maximum speed : FALSE
>> >> Simulate : FALSE
>> >> Write : TRUE
>> >> Finalize CD : TRUE
>> >> Multisession : FALSE
>> >> Burning mode : TAO
>> >> Mode : 1
>> >> ISO Level : 1 (Max. of 11 = 8 + 3 char)
>> >> Character set : ISO 9660
>> >> Joliet : TRUE
>> >> Allow pathdepth more than 8 directories : TRUE
>> >> Allow more than 255 characters in path : TRUE
>> >> Write ISO9660 ;1 file extensions : TRUE
>> >>
>> >> 8:45:30 AM #2 Phase 90 File dlgbrnst.cpp, Line 1836
>> >> Buffer Underrun Protection activated
>> >>
>> >> 8:45:30 AM #3 Text 0 File Reader.cpp, Line 118
>> >> Reader running
>> >>
>> >> 8:45:30 AM #4 Text 0 File Writer.cpp, Line 124
>> >> Writer HL-DT-ST DVDRAM GSA-4081B running
>> >>
>> >> 8:45:30 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
>> >> First writeable address = 0 (0x00000000)
>> >>
>> >> 8:45:30 AM #6 Text 0 File Burncd.cpp, Line 3167
>> >> Turn on Track-at-once, using CD-R/RW media
>> >>
>> >> 8:45:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 245
>> >> Last possible write address on media: 359848 ( 79:59.73)
>> >> Last address to be written: 290017 ( 64:28.67)
>> >>
>> >> 8:45:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 257
>> >> Write in overburning mode: NO (enabled: CD)
>> >>
>> >> 8:45:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137
>> >> Recorder: HL-DT-ST DVDRAM GSA-4081B;
>> >> CDR code: 00 97 15 37; OSJ entry from: NAN-YA Plastics Corporation
>> >> ATIP Data:
>> >> Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3:
>> >> 00
>> >> 00
>> >> 00 (LO 0:00.00)
>> >> Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00
>> >> (invalid),
>> >> 3:
>> >> 00 00 00 (invalid)
>> >>
>> >> 8:45:30 AM #10 Text 0 File DlgWaitCD.cpp, Line 418
>> >> >>> Protocol of DlgWaitCD activities: <<<
>> >> =========================================
>> >>
>> >> 8:45:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
>> >> Setup items (after recorder preparation)
>> >> 0: TRM_DATA_MODE1 (CTransferItem)
>> >> 2 indices, index0 (150) not provided
>> >> original disc pos #0 + 290018 (290018) = #290018/64:26.68
>> >> relocatable, disc pos for caching/writing not required/required,
>> >> no
>> >> patch infos
>> >> -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length
>> >> 290016 blocks [HL-DT-ST DVDRAM GSA-4081B]
>> >> --------------------------------------------------------------
>> >>
>> >> 8:45:30 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 982
>> >> Prepare recorder [HL-DT-ST DVDRAM GSA-4081B] for write in TAO
>> >> DAO infos:
>> >> ==========
>> >> MCN: ""
>> >> TOCType: 0x00; Session Closed, disc fixated
>> >> Tracks 1 to 1:
>> >> 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200
>> >> 594264064, ISRC ""
>> >> DAO layout:
>> >> ===========
>> >> __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
>> >> -150 | lead-in | 0 | 0x00 | 0x41
>> >> -150 | 1 | 0 | 0x00 | 0x41
>> >> 0 | 1 | 1 | 0x00 | 0x41
>> >> 290018 | lead-out | 1 | 0x00 | 0x41
>> >>
>> >> 8:45:30 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1028
>> >> Removed 2 run-out blocks from end of track 1. Length: 290018 ->
>> >> 290016.
>> >>
>> >> 8:45:32 AM #14 Phase 24 File dlgbrnst.cpp, Line 1836
>> >> Caching of files started
>> >>
>> >> 8:45:32 AM #15 Text 0 File Burncd.cpp, Line 4177
>> >> Cache writing successful.
>> >>
>> >> 8:45:32 AM #16 Phase 25 File dlgbrnst.cpp, Line 1836
>> >> Caching of files completed
>> >>
>> >> 8:45:32 AM #17 Phase 36 File dlgbrnst.cpp, Line 1836
>> >> Burn process started at 24x (3,600 KB/s)
>> >>
>> >> 8:45:32 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2342
>> >> Verifying disc position of item 0 (relocatable, disc pos, no patch
>> >> infos,
>> >> orig at #0): write at #0
>> >>
>> >> 8:45:32 AM #19 Text 0 File Mmc.cpp, Line 20180
>> >> Set BUFE: supported -> ON
>> >>
>> >> 8:48:15 AM #20 SCSI -1039 File Cdrdrv.cpp, Line 1441
>> >> SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02FF0000
>> >> Status: 0x04 (0x01, SCSI_ERR)
>> >> HA-Status 0x00 (0x00, OK)
>> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>> >> Sense Code: 0x09
>> >> Sense Qual: 0x01
>> >> CDB Data: 0x2A 0x00 0x00 0x02 0x77 0x40 0x00 0x00 0x20 0x00 0x00
>> >> 0x00
>> >> Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>> >> 0x34 0x10 0x04 0x80 0x09 0x01
>> >>
>> >> 8:48:15 AM #21 CDR -1039 File Writer.cpp, Line 304
>> >> Focus or tracking error
>> >>
>> >> 8:48:16 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229
>> >> all writers idle, stopping conversion
>> >>
>> >> 8:48:16 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223
>> >> conversion idle, stopping reader
>> >>
>> >> 8:48:16 AM #24 SCSI -1039 File Cdrdrv.cpp, Line 1187
>> >> SCSI Exec, HA 1, TA 0, LUN 0
>> >> Status: 0x04 (0x01, SCSI_ERR)
>> >> HA-Status 0x00 (0x00, OK)
>> >> TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
>> >> Sense Key: 0x04 (KEY_HARDWARE_ERROR)
>> >> Sense Code: 0x09
>> >> Sense Qual: 0x01
>> >> CDB Data: 0x35 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>> >> 0x00
>> >> Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
>> >> 0x34 0x10 0x04 0x80 0x09 0x01
>> >>
>> >> 8:48:16 AM #25 CDR -1039 File WriterStatus.cpp, Line 193
>> >> Focus or tracking error
>> >>
>> >> 8:48:16 AM #26 TRANSFER -18 File WriterStatus.cpp, Line 193
>> >> Could not perform EndTrack
>> >>
>> >> 8:48:16 AM #27 CDR -201 File WriterStatus.cpp, Line 196
>> >> Invalid write state
>> >> HL-DT-ST DVDRAM GSA-4081B\H1 T0
>> >>
>> >> 8:48:16 AM #28 TRANSFER -18 File WriterStatus.cpp, Line 196
>> >> Could not perform EndTrack
>> >>
>> >> 8:48:16 AM #29 Text 0 File Mmc.cpp, Line 15005
>> >> <HL-DT-STDVDRAM GSA-4081B> start Close Session
>> >>
>> >> 8:48:16 AM #30 Text 0 File dlgbrnst.cpp, Line 1694
>> >> Set remaining time: 0:00,000 (0ms) -> OK
>> >>
>> >> 8:48:16 AM #31 Phase 38 File dlgbrnst.cpp, Line 1836
>> >> Burn process failed at 24x (3,600 KB/s)
>> >>
>> >>
>> >> Existing drivers:
>> >> File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.189 , size=24832 bytes, created
>> >> 11/17/2004 9:16:48 AM
>> >> File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created
>> >> 10/28/2003 12:02:00 PM (Prassi/Veritas driver for win 2K)
>> >> File 'Drivers\atapi.sys': Ver=5.1.2600.2180
>> >> (xpsp_sp2_rtm.040803-2158),
>> >> size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for
>> >> rec)
>> >> File 'Drivers\xmasscsi.sys': Ver=3.44.0.0 built by: WinDDK, size=5504
>> >> bytes,
>> >> created 12/20/2003 8:03:42 PM (Adapter driver for src)
>> >>
>> >> Registry Keys:
>> >> HKLM\Software\Microsoft\Windows
>> >> NT\CurrentVersion\WinLogon\AllocateCDROMs
>> >> :
>> >> 0 (Security Option)
>> >>
>> >>
>> >>
>> >> --
>> >>
>> >> ======================================
>> >>
>> >> Learning to dislike children at a early age saves
>> >> a lot of expense and aggravation later in life.
>> >>
>> >> =====================================
>> >>
>> >>
>> >>
>>
>>
>>
.
- Follow-Ups:
- Re: Unable to burn DVD's but can Burn CD's
- From: Jaymon
- Re: Unable to burn DVD's but can Burn CD's
- From: Mike
- Re: Unable to burn DVD's but can Burn CD's
- References:
- Unable to burn DVD's but can Burn CD's
- From: Mike
- RE: Unable to burn DVD's but can Burn CD's
- From: Jaymon
- Re: Unable to burn DVD's but can Burn CD's
- From: Mike
- Re: Unable to burn DVD's but can Burn CD's
- From: Jaymon
- Unable to burn DVD's but can Burn CD's
- Prev by Date: Re: IPCONFIG help!
- Next by Date: Bounced emails
- Previous by thread: Re: Unable to burn DVD's but can Burn CD's
- Next by thread: Re: Unable to burn DVD's but can Burn CD's
- Index(es):
Relevant Pages
|
