Re: XP won't start



I made a booboo. Sorry.
This was posted elsewhere in the NG. It was supposed to be posted here as a
part of this thread.

I mentioned the sound card thing only in passsing... I apparently confused
everyone. The main problem is the *.sys files "missing or corrupted"
messages (isapnp.sys and pci.sys). When I boot from the setup CD, it runs
through a few steps (like asking if you want to install SCSI support, if you
want to run ASR), but stops eventually with the error "setupdd.sys could not
be loaded. Error code 4". I tried starting in safe mode and it locks up at
loading Windows\AppPatch\drvmain.sdb. From what I have gleaned from the NG,
it sounds more like I need a boot CD to repair the missing/corrupted files
and or a registry repair. Am I reading this right? How do I make a repair
boot CD? All the hardware has been working. If it was the hardware, the
only possibility could be the sound card and I can't boot with it out of the
system either. SOOOO I don't think it is the hardware. What should I try
next? Please Help. OR should I just theow it out the window??!!??

Robert


"BrianC" <no@xxxxxx> wrote in message
news:eE9dc%235jFHA.3436@xxxxxxxxxxxxxxxxxxxxxxx
> It is probably a hardware failure. Unplug everything but the monitor,
> keyboard, and mouse then restart the computer.
> "Robert" <remdds@xxxxxxxxxxxxx> wrote in message
> news:PItEe.16547$Wt3.670@xxxxxxxxxxxxxxxxxxxxxxxxx
>> This is a repost from 2 days ago. I didn't get a reponse so I am trying
>> again. As an update I have read all I can in this newgroup that may be
>> pertinent with Microsoft KB articles. I would still like advice from one
>> of the MVP out there. Pretty please.
>>
>> Many thanks
>> Robert
>>
>>
>>
>> I have an older Gateway 600MHz P4 (original OS=98SE). I upgraded the
>> system
>> to XP Pro (after months of weekends @ uninstalling incompatible 98
>> software/drivers, etc etc etc). Sound card still didn't work. I ordered
>> a
>> new updated CD from Creative to me up and running in that department. I
>> went to install it all last night and XP wouldn't even start, not even in
>> safe mode. It worked fine last week. I get didfferent errors. The
>> first
>> error was "isapnp.sys is missing or corrupted". It said run setup repair
>> to
>> attempt repair/replacement of file. Setup won't run. It says
>> "setupdd.sys
>> could not be loaded. Error code 4". I tried starting in safe mode and
>> it
>> locks up loading at Windows\AppPatch\drvmain.sdb. I have tried "all" the
>> F8
>> startups to no avail. I have tried to boot with the XP install CD.
>> Somewhere in all this I also got "pci.sys is missing or corrupted". I
>> also
>> got this pci.sys message weeks ago soon after the initial upgrade;
>> however I
>> was able to get into XP and delete the corrupted pci.sys to get another
>> installed and then things ran fine. The Quantum Fireball HD tests fine.
>> Can I, should I, make a boot floppy to copy these files over? If so,
>> just
>> boot to cmd.com?? ANY IDEAS OUT THERE WOULD BE A GODSEND. MTIA.
>>
>> Robert
>>
>>
>
>


.



Relevant Pages

  • Re: Cant boot
    ... I have not been able to get it to boot up since. ... repair was finished. ... Is there any malware going around that would cause this? ... Here are some general hardware troubleshooting steps: ...
    (microsoft.public.security)
  • Re: Trying to do a windows XP repair install and comp keeps shutting o
    ... safe mode, boot using last known good configuration, boot ... I don't have a windows XP disc. ... A good way to determine if the problem is software or hardware is to boot with a rescue system such as Knoppix or a Bart's PE. ... if you don't have these things take the machine to a professional computer repair shop. ...
    (microsoft.public.windowsxp.general)
  • Re: SBS server in a constant reboot.
    ... Forklifting the OS onto different hardware and then doing a repair can ... >> Les Connor [SBS Community Member] ... >>> it doesn't get that far to boot into safemode. ...
    (microsoft.public.windows.server.sbs)
  • Re: XP wont start
    ... Error code 4". ... When I boot from the setup CD, ... > through a few steps (like asking if you want to install SCSI support, ... > and or a registry repair. ...
    (microsoft.public.windowsxp.help_and_support)
  • windows hangs when booting the system
    ... I need to repair a Windows 2000 pro installed HardDisk, ... into a new Computer with different Hardware, ... When tryin to boot the System Windows hangs, ...
    (microsoft.public.win2000.applications)