Re: my power supply power fan...

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

"Richard Urban" <richardurbanREMOVETHIS@xxxxxxxxxxx> wrote in message
news:O46dx6MYFHA.580@xxxxxxxxxxxxxxxxxxxxxxx
> The fan gets it's power from the power supply it resides within. If
> the fan is not turning the power supply needs replacement. The wire
> you are referring to is only a speed sensor wire and has nothing to do
> with the fans spinning - or not!
>
> --
> Regards,
>
> Richard Urban
>
> aka Crusty (-: Old B@stard :-)
>
> If you knew as much as you think you know,
> You would realize that you don't know what you thought you knew!
>
>
> "Happy" <cathypham@xxxxxxxxxxxx> wrote in message
> news:9eQke.11087$Ot6.804391@xxxxxxxxxxxxxxxxxxxxxxxx
>> hi, my power supply has a power fan cable but my motherboard doesnt
>> have the spot for it. Is it important to get the power fan cable
>> running? and how? Can i plug this power fan cable into the chasis fan
>> on the motherboard slot? I guess no because then there is no spot for
>> my chassis fan. Please help me how to get the power fan in my PSU
>> running. Thanx alot.
>>
>
>

Look at a Dell, HP and then take a laugh.

--
William



.

Relevant Pages

  • Re: Installing a ceiling fan
    ... You should also have in the Junction box a Black, ... the power source as well as the Red, Black, White, Ground. ... using one wire for the Power In and the other 2 for the Power Out to the ... look at the Junction Box under the Fan to see where the wires are fed from. ...
    (alt.home.repair)
  • Re: Boot process not starting
    ... When I push the power button all the fans come to life and spin for 14 seconds, then they stop for a few seconds and then start up again for 14 seconds. ... No I haven't looked at the socket contacts carefully because I used the last of my Arctic Silver thermal paste for re-assembling after checking the cooler fan pushpins but I will have to have another look at this. ... and the memory controller is set up. ... a microcontroller inside them. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Need a whirlwind fan motor? Help is on the way!
    ... possible that this motor will work with the existing mounting bracket. ... Fan Blade: http://www.grainger.com/Grainger/DAYTON-Propeller-5JLN4 ... insulated 1/4" female quick disconnect crimp on wire terminations ... The Triac board outputs 26vac to power a custom fan in the topper. ...
    (rec.games.pinball)
  • Re: Turn off laser printer with power strip?
    ... I'm looking at a new-in-the-box APC surge protector, ... >20-55dB EMI/RFI Filtering ... In fact, in light of your claim that "n reality, a power ... > after power off, then if fan does not run, damage will result. ...
    (comp.periphs.printers)
  • Re: Boot process not starting
    ... When I push the power button all the fans come to life and spin for 14 seconds, then they stop for a few seconds and then start up again for 14 seconds. ... No I haven't looked at the socket contacts carefully because I used the last of my Arctic Silver thermal paste for re-assembling after checking the cooler fan pushpins but I will have to have another look at this. ... and the memory controller is set up. ... a microcontroller inside them. ...
    (alt.comp.hardware.pc-homebuilt)