Re: Added Win98 to Acer Tableyt PC, but cannot dual-boot to it
- From: "Rick \"Nutcase\" Rogers" <rick@xxxxxxxx>
- Date: Sun, 8 May 2005 19:02:27 -0400
Hi,
You can't boot the Win98 installation from the XP installation if the file
system is NTFS. For this you need to use the Boot Magic program. It is
likely seeing the existing XP bootloader when you go to install it, hence
the message you are getting.
--
Best of Luck,
Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Associate Expert - WindowsXP Expert Zone
www.microsoft.com/windowsxp/expertzone
Windows help - www.rickrogers.org
"Bodo Diehn" <bododiehn@xxxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:427e8e31.16996699@xxxxxxxxxxxxxxxxxxxx
> Well, I have a new Acer Travelmate 300 that came with XP Tablet
> Edition installed. Since I want to be able to access a true DOS
> version for imaging etc. and have a PC-Card reader which is not
> suppported in XP, I decided to add Win98. I re-partitioned with
> Partition Magic such that XP was now on the second primary partition,
> and impressed an image of Win98 on the first primary partition. Win
> 98 now shows up as G: drive (D: and E: are logical drives and have my
> apps and data respectively, and F: is theCD/DVD drive)
> At this point, I tried to install Bootmagic 1.0, but got a message
> that a boot manager was already installed. To my knowledge that is
> not true, but PQMagic show a non-DOS partition at the beginning of the
> HD. So I figured I would use XP's boot manager, and added a line to
> boot.ini, as follows:
> [boot loader]
> timeout=5
> default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
> [operating systems]
> ADDED: multi(0)disk(0)rdisk(0)partition(1)\W95="Microsoft Windows 98"
> /fastdetect
> multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP
> Tablet PC Edition" /fastdetect
> Windows 98 now shows up as choice, but when I select it, I get the
> message that \system32\hal.dll is corrupt or missing. I copied it
> from the XP to the Win98 partition, but that did not change anything.
> I did some looking in this newsgroup, but many suggestions involve a
> Repair CD,which did not come with my laptop. I also looked at Knox's
> instructions on how to create bootsect.dos, but don't know if that's
> what's needed, and am afraid to proceed. Any suggestions, please?
>
>
.
- References:
- Added Win98 to Acer Tableyt PC, but cannot dual-boot to it
- From: Bodo Diehn
- Added Win98 to Acer Tableyt PC, but cannot dual-boot to it
- Prev by Date: Re: Added Win98 to Acer Tableyt PC, but cannot dual-boot to it
- Next by Date: Re: stop error:0x1000000a (0x412ebcb4, 0x00000002, 0x00000000, 0x804e85bc)
- Previous by thread: Re: Added Win98 to Acer Tableyt PC, but cannot dual-boot to it
- Next by thread: browser redirecting XP home
- Index(es):
Relevant Pages
|
