Re: new computer/old harddrive install



Robert wrote:
I got a new motherboard/CPU and I put the old harddrive in it but i would not boot, it said disk error so I put in the XP disk and tried repair and it took me to c:\windows\ and I have no idea what to do next?? PLEASE help


Normally, and assuming a retail license (many OEM installations are not transferable to a new motherboard - check yours before starting), unless the new motherboard is virtually identical (same chipset, same IDE controllers, same BIOS version, etc.) to the one on which the WinXP installation was originally performed, you'll need to perform a repair (a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

The "why" is quite simple, really, and has nothing to do with licensing issues, per se; it's a purely technical matter, at this point. You've pulled the proverbial hardware rug out from under the OS. (If you don't like -- or get -- the rug analogy, think of it as picking up a Cape Cod style home and then setting it down onto a Ranch style foundation. It just isn't going to fit.) WinXP, like Win2K before it, is not nearly as "promiscuous" as Win9x when it comes to accepting any old hardware configuration you throw at it. On installation it "tailors" itself to the specific hardware found. This is one of the reasons that the entire WinNT/2K/XP OS family is so much more stable than the Win9x group.

As always when undertaking such a significant change, back up any important data before starting.

This will also probably require re-activation, unless you have a Volume Licensed version of WinXP Pro installed. If it's been more than 120 days since you last activated that specific Product Key, you'll most likely be able to activate via the Internet without problem. If it's been less, you might have to make a 5 minute phone call.


--

Bruce Chambers

Help us help you:
http://dts-l.org/goodpost.htm
http://www.catb.org/~esr/faqs/smart-questions.html

You can have peace. Or you can have freedom. Don't ever count on having both at once. - RAH
.




Relevant Pages

  • Re: URGENT - System State Restore - SBS
    ... How to Repair Your Installation of Windows ... You may be able to repair a damaged Windows Server 2003 installation by ... Hardware failures are beyond the scope of this article. ...
    (microsoft.public.windows.server.sbs)
  • Re: Changing Computer with XP
    ... BIOS-locked to a specific chipset and therefore not transferable to a new motherboard - check yours before starting), unless the new motherboard is virtually identical to the one on which the WinXP installation was originally performed, you'll need to perform a repair (a.k.a. in-place ... WinXP, like Win2K before it, is not nearly as "promiscuous" as Win9x when it comes to accepting any old hardware configuration you throw at it. ... On installation it "tailors" itself to the specific hardware found. ...
    (microsoft.public.windowsxp.basics)
  • Re: Active Directory restore with disimilar hardware
    ... Are you saying that the "inplace repair" described for Windows 2000 Server ... I have done the inplace repair on new hardware of our ... Restart the computer from the installation media. ...
    (microsoft.public.windows.server.active_directory)
  • Re: changing motherboard
    ... Do a repair reinstall. ... Once the hardware is installed, boot into BIOS ... then after the license agreement take `Repair Installation`. ...
    (microsoft.public.windowsxp.general)
  • Re: OT: Humor - If Dr. Seuss were a technical writer.
    ... I've been doing computer repair over the past 9 years I have developed ... Every customer ... data cables working yesterday. ... is budgeted toward the installation. ...
    (alt.2600)