Re: correcting BIOS setting

From: Mr. Selectman (boodah_m_at_adelphia.net)
Date: 09/19/04


Date: Sun, 19 Sep 2004 08:07:11 -0400

You could try to reset BIOS by removing battery for about ten minutes.

"joseph t." <josepht@discussions.microsoft.com> wrote in message
news:0D8CC860-273E-4C56-A6A1-4D6BE52E225A@microsoft.com...
> Messing around with my BIOS. I entered display setting and changed
> setting
> from PCI to onboard. Rebooted computer and now there is no display (no
> signal). I can't correct BIOS, because there's nothing to see. I've
> contacted manufacturer regarding problem, no success. Anyone out there
> with
> ideas on correcting this problem. Computer is an HP Pavillion 771n.
>



Relevant Pages

  • correcting BIOS setting
    ... I entered display setting and changed setting ... Rebooted computer and now there is no display (no ... I can't correct BIOS, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: correcting BIOS setting
    ... onboard video is the system default setting. ... > You could try to reset BIOS by removing battery for about ten minutes. ... Rebooted computer and now there is no display (no ... I can't correct BIOS, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: correcting BIOS setting
    ... took a sip ... > Associate Expert - WindowsXP Expert Zone ... >> Messing around with my BIOS. ... I entered display setting and changed ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: correcting BIOS setting
    ... Move the monitor plug from the add-on card to the onboard card. ... It's either that or find someone who knows that BIOS well enough to walk you ... I can't correct BIOS, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Can one have the wrong BIOS installed?
    ... I made a note of what BIOS ... > the wrong BIOS for my board & the download refused to install. ... > have gone back to web site & triple checked that I had downloaded the ... specification to insure you get the correct BIOS. ...
    (microsoft.public.windowsxp.help_and_support)