Re: computer doesn't detect USB items
From: neil (neilp_67_at_hot_mail.com)
Date: 08/23/04
- Next message: Leon: "Re: Spoolsv.exe"
- Previous message: Ramesh [MVP]: "Re: "Open" box in "Run" command"
- In reply to: DcL222: "Re: computer doesn't detect USB items"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 23 Aug 2004 10:09:28 GMT
The "universal serial bus controllers" are normally listed at the bottom, I
assume you can see them but windows reports they are working correctly.
Although XP does have support for USB 1 & 2 you sometimes need drivers
specific for the motherboard you are using. (it's worth checking) other than
that you could uninstall the current drivers and let windows re-detect the
devices.
all the best
Neil
"DcL222" <DcL222@discussions.microsoft.com> wrote in message
news:09FF223D-40A9-4A5E-97F8-3B5A8C0CB878@microsoft.com...
> there is no status of the usb devices
> and none of the devices need drivers.
>
> the usb 2.0 driver is not necessary for the mobo since the windows xp
> service pack 1 includes the drivers.
>
> "neil" wrote:
>
> > What is the status of the USB devices in device manager and does it need
> > specific drivers that came with the motherboard. (usually on the CD)
> >
> > Neil
> > "DcL222" <DcL222@discussions.microsoft.com> wrote in message
> > news:13D863FF-B64D-4B25-8721-8D3B9A00E490@microsoft.com...
> > > I have a USB mass storage device and a digital camera (with usb plug)
that
> > > doesn't get detected on my Windows XP Pro computer when i plug and
play.
> > > Both devices says no driver necessary for XP computers and even when I
did
> > > install the drivers, nothing changed and computer still couldn't
detect.
> > I
> > > have installed all the latest USB drivers for SP1. (Both of these
devices
> > > work on my brother's XP pro computer plug and play). So I was
wondering
> > if
> > > there's any registry that i need to modify.
> > >
> > > p.s. if this is any help, this computer is custom made (by me) with
asus
> > > mobo P4P800 and intel pentinum 4.
> > >
> > > p.p.s. the devices work only when i have them plug into the slot
before I
> > > turn on the computer.
> > >
> > > thx ahead for any1 that can give help.
> >
> >
> >
- Next message: Leon: "Re: Spoolsv.exe"
- Previous message: Ramesh [MVP]: "Re: "Open" box in "Run" command"
- In reply to: DcL222: "Re: computer doesn't detect USB items"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
