[5]: INTERNET ACCESS/RESPONSE PROBLEM

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Richard White (whiter_at_gmx.co.uk)
Date: 08/09/04 

Date: Mon, 9 Aug 2004 14:46:02 +0100

"Wesley Vogel" <123WVogel955@comcast.net> wrote in message news:PZBRc.230783$IQ4.138038@attbi_s02...
[...snipped...]

> Explanation
> The server could not establish a listening endpoint on the transport listed
> in the event. The status code returned from the underlying transport is in
> the Data box. This status code might explain why this operation failed. The
> problem might be caused by one of the following:
>
> A lack of memory,
> A malfunctioning network interface, or
> A network device that became unavailable during startup.

Hi ... the 'client' to the gateway pc is totally shagged as far as any internet access is
concerned - no matter which pc is the client. (I have only two, so can only swap over
client/gateway)

BUT .. if the client is given its own internet access (via a payg dial-up) then all is well (apart
from the slow modem speeds!). As soon as the independent modem link is disconnected, then the
client is once again unable to find sites, use yahoo or windowsupdate etc..

I must stress that this problem effects WHICHEVER pc is the client. Each time I swap the
client/gateway over, after a brief period of good internet access, the problem suddenly resurfaces
on the client pc.

The client also cannot access the list of drives/folders and printers within the workgroup, and
cannot create/map network drives/printers. The gateway pc however can access its own networked
items, but cannot list those on the client pc. So I also cannot create on the client a mapped
network drive from the gateway (ie. can't create J: (on client) = C: (on gateway).)

I have tried my best to follow the points in the various links you gave. But none of them really
matched what I am experiencing.

[...snipped...]

Relevant Pages

  • RE: Lost my outlook contact... :(
    ... the network configuration is started from a web page located ... client computer, you will see a welcome page to invite you to start the ... local user profiles to the domain user profile. ... Before joining client computers to the network, ...
    (microsoft.public.windows.server.sbs)
  • Re: SMS 2.0 and SMS 2003 Running at same time in same domain.
    ... the clients are on the network. ... The operating system reported error 53: ... Possible cause: The client is offline. ... Verify that the client is connected to the network and that the SMS ...
    (microsoft.public.sms.setup)
  • Re: EventID 18456 Login failed for SA
    ... You mention that your computer is not on a network, ... Is 'Road Runner' your internet access and when connected to the internet is ... > I found osql-32 as client trying to login to SQL server. ...
    (microsoft.public.sqlserver.server)
  • RE: Printing from Win9x clients stops
    ... Open Server Management. ... then right-click the name of the computer running Windows Small Business ... >From the client computer: ... The Select Network Component Type ...
    (microsoft.public.windows.server.sbs)
  • RE: Wireless Security Notes and Findings (from this list and other places)
    ... There are two general areas of wireless security: Authentication and ... authentication standard that works with wireless networks. ... client computer runs a client program to connect to the network with a ...
    (Security-Basics)