Re: CD Burner problem

Tech-Archive recommends: Fix windows errors by optimizing your registry

From: Willie (willieinkazoo_at_youhuu.com)
Date: 07/02/04


Date: Thu, 1 Jul 2004 20:20:33 -0400

Have you tried to uninstall the drive from device mgr, and rebooting,
letting windows re-install it?

Willie

"Mikey" <hoho@yahoo.com> wrote in message
news:ewEWke8XEHA.1656@TK2MSFTNGP09.phx.gbl...
> I have a Lite-On LTR 48246S CD Burner and have developed the following
> problem. It will not burn onto a CD-R...it just cycles up and down
> perpetually. I even tried updating the firmware which made the problem
> worse. Now if there is a CD in the drive when I boot up, the burner tries
to
> access the disk and the machine will continually reboot. I suspect I have
> some damaged/missing files as I was using one of those "registry cleaner"
> programs and that may have caused the problem so I'm not sure it is
actually
> a problem with the drive itself.
>
> The computer is an AMD Athlon 2100+, 40 Gb HD, 512 Mb RAM running Win XP
> Prof.
>
> Any ideas or suggestions are appreciated!
>
> Regards,
> Mike
>
>



Relevant Pages

  • Re: Service Pack 2 For XP
    ... > After downloading service pack 2 my cd rom and burner will not read ... > any cd's only by rebooting with the disc's in the drives. ... Check your drives manufacturer for a firmware update? ...
    (microsoft.public.windowsupdate)
  • Service Pack 2 For XP
    ... After downloading service pack 2 my cd rom and burner will not read any cd's ... only by rebooting with the disc's in the drives. ...
    (microsoft.public.windowsupdate)
  • RE: cd burner wont read blank cds
    ... If no luck there, try rebooting your ... PC with the burner drive empty, ... > i used to be able to burn cds but all of a sudden my burner won't read blank ...
    (microsoft.public.windowsxp.music)
  • Re: my burner isnt working
    ... You can try uninstalling the drivers for your CD burner, rebooting and ... then reinstalling them. ... Good luck ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: DCOM error on brand new setup
    ... "Willie" wrote: ... > popup config changes box, ... > msconfig, and recheck one box at a time, rebooting after each change to look ... > re-installing the OS twice now with the same problem. ...
    (microsoft.public.windowsxp.help_and_support)