Re: SATA Raid driver problem...
From: johnf (john_f_at_bigREMOVEpond.net.au)
Date: 06/22/04
- Next message: Maxx: "Long boot and missing systray icons... >Need Help<"
- Previous message: Bruce Chambers: "Re: VBScript runtime error (U-Bid order)"
- In reply to: Nospam: "Re: SATA Raid driver problem..."
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 22 Jun 2004 23:18:16 +1000
Beauty, thanks a lot for that, you've pointed me in the right direction.
-- johnf > johnf > > I do not know about Powerquest but with the MaxBlast (Maxtor) CD it is > possible to copy from IDE to SATA, IDE to IDE or SATA to SATA. I copy > from SATA to SATA without any difficulty using this CD. I used to use > Ghost but it didn't work anymore once I tried copying SATA drives. It > couldn't see the SATA drives. > > Boot up to the MaxBlast CD and choose the option for copying partition > to partition. > > Hope this helps. > > Nospam > > "johnf" <john_f@bigREMOVEpond.net.au> wrote in message > news:%23GxWV%23CWEHA.2816@TK2MSFTNGP11.phx.gbl... >> "BAR", you seem to know a bit about SATA. >> >> Do you know whether it is possible to use Powerquest Drive Image 7.0 >> or 2002 to perform a complete OS 'Copy Drives' transfer from a normal >> IDE drive to a SATA drive on the same PC? >> I'm receiving plenty of 'can't do' advice on this & to date have had >> no joy from Symantec. >> >> -- >> johnf >> >>> Are you implying that you have RAID functioning on a single disk >>> system? >>> >>> Please provide more detail. >>> >>> For example, if you have only one HDD, then you must set your BIOS >>> state to BASE and not RAID for the drivers and raid setup to function >>> correctly and so that Windows setup will proceed and complete. >>> >>> Windows will require the driver disk to be inserted during the first >>> phase of setup in order that it can recognise and use the SATA drive. >>> At the point when you are propted to press F6 to install a SCSI device >>> driver. >>> >>> I have used Giga-Byte and WD disk in this combination several times >>> and not yet had probs. >>> >>> "Greg" wrote: >>> >>>> I just bought a new system that I'm piecing together. I have a >>>> giga-byte 8knxp REV 2.0 motherboard, and a WD 160gig SATA hd. I got >>>> windows xp pro to load, but when trying to install the motherboard >>>> drivers I have a problem with the SiI 3112 SATARaid controller. It >>>> shows up in the device manager as a ??. When I install the driver, >>>> and reboot windows it comes up with the Windows XP PRO screen with >>>> the dots running across the bottom of the screen and then just >>>> freezes. When it gets to that screen the drive light doesn't even >>>> come on. Then the dots freeze and I have to reboot. I then am told >>>> windows didn't load properly, and I elect to go back to the >>>> previously working state. I have an almost identical system that I >>>> built 3 months ago with no problems with this. My SiI 3112 SATARaid >>>> controller works fine with all the updates... in fact I just loaded >>>> the newest one from MSFT windows update today (driver dated may 7th, >>>> 2004). I tried installing this one on my new computer with the same >>>> freezes. Any help out there? >>>> >>>> Thanks. >>>> gregr1974@sbcglobal.net
- Next message: Maxx: "Long boot and missing systray icons... >Need Help<"
- Previous message: Bruce Chambers: "Re: VBScript runtime error (U-Bid order)"
- In reply to: Nospam: "Re: SATA Raid driver problem..."
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
