Re: Blank screen after playing with bios

From: Bill L (billc1_at_blueyonder.co.uk)
Date: 05/09/04


Date: Sun, 09 May 2004 15:20:16 GMT


"David Gray" <david.swallow@btinternet.com> wrote in message
news:AB64B78E-9B36-468D-96E5-42CD73550632@microsoft.com...
>I have just installed Windows XP from Windows 98. I was installing some
>software. When I finished installing it I was told to re-boot my computer
>so I did. On the reboot I redid the BIOS but only changed a little. I told
>the BIOS that I had a floppy drive in the Drive A slot under the Standard
>CMOS features I saved and exited. My computer rebooted but all that
>happened when I rebooted was that a blank screen came up. I can here all of
>the fans going round but my moniter doesn't accept that there is a
>connection between the moniter and the computer. I tried the screen on a
>Laptop and it works fine so I know its not the screen. When I reboot it
>doesn't even get as far as the windows loading page
>
> I think the motherboard is trying to load BIOS/Windows from the floppy
> drive but I can't get as far as bios to change it back.
>
> Please help
> Thanks
> David Gray

Hello

I don't think that merely changing the FDD setting should cause the problem
you're describing. However, try clearing the CMOS and see if this fixes the
problem.

I don't know what motherboard etc you're using but there should be a CMOS
clear jumper (or remove the battery for a few seconds if there isn't a CMOS
jumper) then re-boot. This *should* restore the default BIOS settings. You
may still need to adjust the BIOS settings according to what CPU etc you're
running.

HTH

BillL



Relevant Pages

  • Weird boot problem
    ... Windows Vista Home Premium installed. ... I was installing a network drive and the laptop ... restart, I can get in via safe mode, but even there the explorer does ... real theory at this point, but I cannot flash the BIOS in Safe Mode, ...
    (microsoft.public.windowsxp.basics)
  • Re: Q811493 et al - borks my BIOS??
    ... This is a patch within Windows and can do nothing to slow down the ... BIOS sectionb of the boot. ... Disable everything especially antivirus before installing (SOP for ...
    (microsoft.public.windowsxp.security_admin)
  • Re: hard drive format
    ... What does your BIOS say? ... > it reports the full size, then it is Windows. ... > installed these after installing Windows, you may simply need to create ... A computer sees a kilobyte as 1024 bytes. ...
    (microsoft.public.windowsxp.hardware)
  • Re: hard drive format
    ... your BIOS must support 48bit LBA. ... Service Pack 2 for Windows. ... installed these after installing Windows, you may simply need to create ... a partition of everything after the 137 GB mark and format it. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Windows 2000 hangs at startup after processor change
    ... Try resetting the cmos, that should fix it. ... he's broken something when he changed the cpu. ... into the BIOS, but it wouldn't boot. ... it goes to the black "Starting Windows" ...
    (alt.comp.hardware.pc-homebuilt)