RE: Crashes with DVD/CD drive

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Ross (anonymous_at_discussions.microsoft.com)
Date: 04/01/04


Date: Wed, 31 Mar 2004 23:56:09 -0800

Dito, it worked a few months ago but then it would not burn DVDs it will not recognize RW+R and did not find dvd-R until today. Ist the storage support said it was bad media until I told them I was using sony media. 2ndly the drive check software I downloaded from sony storage supports hangs up a lot.

Not sure which driver you are looking for besides the firmware Sony age me this #6) is at http://www.adaptec.com/worldwide/support/driverdetail.jsp?sess=no&language=English+US&cat=/Product/ASPI-4.70&filekey=aspi_471a2.exe good luck.

1)Next they had me change the unit to Master on IDE channel 2 on its own lonly ribon. restart
2)Then they had me remove any buring software, and the MyDVD and record now have such a problem being remove they have special instructions from deleting files to removing items from your registry, That was 8 programs INC nero 5.5
3)They had me remove checks from use this drive to burn cd.s in advance setting of the drives properties in the device manager.
4) update the firmware from their site
5)go to the Ide ATA atap device in the manager and advance tab to change devices from Dma if avail to pio
6) They sent me alink to update ascpi driver 471.2 from adaptecs site.
7) the had me reinstall just the record now program and it did try to recognize and burn a DVD-R but failed it still will not reccog nize blank DVD +RW media (please insertr blank disk)
8) lastly they had me update may Motherboard bios
9) I am waiting on the XP service pack CD to come and then it still does not work I get to call back provided it happen in the 2 week period of support that I paid $20 for because technicaly my warranty ran out 2 month ago. even though I intsalled the unilt a month after I bought it and these problems stared about 3 months ago. I thought since it worked before that it was a software update issuse and not possiblly a defective unit. They tell me there is no repair for out of warranty, meaning it might be trash. If any ofd these help someone let me know or if you find a solution.



Relevant Pages

  • Re: dvds not recognized
    ... 1)Next they had me change the unit to Master on IDE channel 2 on its own lonly ribon. ... 3)They had me remove checks from use this drive to burn cd.s in advance setting of the drives properties in the device manager. ... They sent me alink to update ascpi driver 471.2 from adaptecs site. ...
    (microsoft.public.windowsxp.help_and_support)
  • Sony DRU 500ax DVD will not recognize DVDs
    ... 1)Next they had me change the unit to Master on IDE channel 2 on its own lonly ribon. ... 3)They had me remove checks from use this drive to burn cd.s in advance setting of the drives properties in the device manager. ... They sent me alink to update ascpi driver 471.2 from adaptecs site. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: DVD-RW drive not recognizing DVD media HELP!!!! any MS MVPs out there???
    ... 1)Next they had me change the unit to Master on IDE channel 2 on its own lonly ribon. ... 3)They had me remove checks from use this drive to burn cd.s in advance setting of the drives properties in the device manager. ... They sent me alink to update ascpi driver 471.2 from adaptecs site. ...
    (microsoft.public.windowsxp.general)
  • Sony DVD DRU 500AX will not read blanK DVD-r +RW
    ... They had me change the unit to Master on IDE channel 2 on its own lonely ribon. ... 3)They had me remove checks from use this drive to burn cd.s in advance setting of the drives properties in the device manager. ... They sent me a link to update ascpi driver 471.2 from adaptecs site. ...
    (microsoft.public.windowsxp.hardware)
  • RE: DVD audio: good through USB headset, garbled through speakers
    ... Are you installed the NEC drive on the seondary IDE channel as slave and the ... Go to device manager again and check the secondary IDE channel, ... click the Transfer Mode button and select DMA if available and than ... NEC 3550A DVD-RW ...
    (microsoft.public.windowsxp.hardware)