Re: WXP setup unable to copy invalid windows image
From: Bruce Chambers (bchambers_at_nospamcableone.net)
Date: 03/25/04
- Next message: hbtee: "RE: message count on welcome screen"
- Previous message: Bruce Chambers: "Re: win 98 and xp home"
- In reply to: tetreaultl: "WXP setup unable to copy invalid windows image"
- Messages sorted by: [ date ] [ thread ]
Date: Wed, 24 Mar 2004 19:04:52 -0700
Greetings --
Problems copying files or corrupted files during installation
are most often caused by defective or sub-standard hardware; in order
of likelihood, either RAM, the hard drive, or the motherboard. On
much less frequent occasions, a bad CD or defective CD drive can also
cause this.
Have you made sure that your PC's hardware components are capable
of supporting WinXP? This information will be found at the PC's
manufacturer's web site, and on Microsoft's Windows Catalog:
(http://www.microsoft.com/whdc/hcl/default.mspx) Additionally, run
Microsoft WinXP Upgrade Advisor to see if you have any incompatible
hardware components or applications.
You should, before proceeding, take a few minutes to ensure that
there are WinXP device drivers available for all of the machine's
components. There may not be, if the PC was specifically designed for
Win98/Me. Also bear in mind that PCs designed for, sold and run fine
with Win9x/Me very often do not meet WinXP's much more stringent
hardware quality requirements. This is particularly true of many
models in Compaq's consumer-class Presario product line or HP's
consumer-class Pavilion product line. WinXP, like WinNT and Win2K
before it, is quite sensitive to borderline defective or substandard
hardware (particularly motherboards, RAM and hard drives) that will
still support Win9x.
HOW TO Prepare to Upgrade Win98 or WinMe
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q316639
Upgrading to Windows XP
http://aumha.org/win5/a/xpupgrad.htm
HOW TO Troubleshoot Windows XP Problems During Installation When You
Upgrade from Windows 98 or Windows Me
http://support.microsoft.com/default.aspx?scid=KB;en-us;q310064
Bruce Chambers
-- Help us help you: http://dts-l.org/goodpost.htm http://www.catb.org/~esr/faqs/smart-questions.html You can have peace. Or you can have freedom. Don't ever count on having both at once. -- RAH "tetreaultl" <tetreaultl@cnrc-nrc.gc.ca> wrote in message news:%2325LmdcEEHA.2804@tk2msftngp13.phx.gbl... > I'm trying to install WXP on to a PC I just bought. > > When I tried to install at the stage in the bootable setup when it > is > copying needed files from the CD to the HD, at around 17 % setup > starts > to throw up errors saying that some files are not valid windows > images - > files such as ntoskrnl.exe and various other critical dll's and > exe's. > > If I press enter repeatedly to retry the file copy sometimes setup > manages > to copy it correctly, but most of the time not. Ignoring the errors > by > pressing escape does not help either. > > I have tried installing WXP from other CD same result > > I then tried installing Win98 on the same PC with the original CD > drive, and > it worked just fine, and I had 98 up and running in no time. > I then formatted the drive and tried to install W2K.. not fully - > only as > a test to see if I could get past copying files stage, yet the same > errors > occurred. > > Thank's in advance > > Louis > > Specs of the problem PC: > Neat-MBL800DL-a4-0129 Motherboad > 512 Mb Ram > 1x 30Gb Maxtor IDE HD > 1x CD-ROM (Generic) > > >
- Next message: hbtee: "RE: message count on welcome screen"
- Previous message: Bruce Chambers: "Re: win 98 and xp home"
- In reply to: tetreaultl: "WXP setup unable to copy invalid windows image"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
