Re: USB Device can Perform Faster........ - Doc1.htm (0/1)

On Fri, 9 Oct 2009 18:14:58 -0400, "LVTravel" <none@xxxxxxxxxxx> wrote:



<charliech@xxxxxxxxxxxxxxxxxxx> wrote in message
news:p58vc59phmlhhjel408fqvf5hsbnebe4fh@xxxxxxxxxx
I continue to get the following message regarding a USB device:

---------------------------
This device can perform faster.
This USB device can perform faster if you connect it to a HI-Speed USB
2.0 Port. For a list of available ports, click below.
----------------------------------

I click below and it shows my USB2 ports, but no where does it tell me
the device that it is referring to! How can I determine the device in
question? I have attached a screen shot of the "click below" screen -
and I hope that is not out of line for posting here.

Any insights are appreciated.

Charlie

What happens when you plug the device you are experiencing an error with
into another computer or another port on the same computer? Have you tried
using a different, USB 2.0 certified cable?

Do you have a USB 2 port? Have you checked. Right click My Computer,
Manage, Device Manager, Universal Serial Bus Controllers. If you don't have
one that says Standard Enhanced PCI to USB Host Controller (or similar with
the word Enhanced) you only have USB 1.1.

Does it work correctly when you unplug all USB devices except for the device
at issue?

http://support.microsoft.com/kb/310575

Ok, let me explain further.
I have an 8 port USB2 Controller. All my USB devices are plugged into
it.

All my devices work, but I keep getting this message. If the message
would identify the device it has a problem with, then I could research
it. I checked in Device Manager and the port is listed as ""Intel(R)
82801EB USB2 Enhanced Host Controller 24DD".

So what am I missing?

Thanks
Charlie
.

Relevant Pages

  • Re: USB 2 or 1
    ... Does it connect as a USB2 on ... Then I err to the view that the High Speed mode port on the disk drive ... invention of USB 2) have a High Speed mode port? ... If a USB2-to-USB2 connection cannot be made (either because peripheral or ...
    (uk.comp.misc)
  • usb_insert_transfer panic with if_zyd
    ... When I use my ZyXEL G-220 Wireless USB Stick with the if_zyd driver, ... <ACPI PCI bus> on pcib0 ... device problem, disabling port 1 ... <Ethernet over FireWire> on firewire0 ...
    (freebsd-current)
  • 2.6.10-rc1 & ahci & IHC6R & 925X & raid1
    ... usb modules for console, usb keyboard, network and starting a shell. ... ACPI: PM-Timer IO Port: 0x808 ... PCI: PCI BIOS revision 2.10 entry at 0xfb768, ... usbcore: registered new driver hub ...
    (Linux-Kernel)
  • Re: EZ-USB and VIA host controller
    ... I see in Device Manager "Controller Host Enhanced USB2 VIA" and "Intel USB2 Enhanced Host Controller". ... I have installed the program USB Monitor " www.hhdsoftware.com " to intercept the descriptor USB. ... If I try to intercept with USB Monitor a peripheral any connected to the Host Controller VT6212, hangs PC PC: I have tried with the memories USB and with FX2. ... The PC doesn't go to crash but not responding to the keyboard, mouse and network connections. ...
    (microsoft.public.development.device.drivers)
  • usb does not work on vias smp mainboard
    ... I installed kernel 2.4.21 on an via's mainboard, it seems that the usb ... number of MP IRQ sources: ... PCI Interrupt Link ... Port indicators are not supported ...
    (Linux-Kernel)