to clear CMOS

I understand that I need to unplug the computer first when moving the jumper
from the original pin position to pins 2,3.
Now that the jumper is in the 'clear CMOS' pins, for how long should I power
up the computer before shutting down to replace the jumper to its original
position?

The manual didn't state this clearly.
Thank you.
.

Relevant Pages

  • Re: to clear CMOS
    ... from the original pin position to pins 2,3. ... Now that the jumper is in the 'clear CMOS' pins, ...
    (microsoft.public.windowsxp.hardware)
  • Re: to clear CMOS
    ... from the original pin position to pins 2,3. ... Now that the jumper is in the 'clear CMOS' pins, for how long should I power ... move the CMOS jumper to pins 2 and 3.. ...
    (microsoft.public.windowsxp.hardware)
  • Re: to clear CMOS
    ... from the original pin position to pins 2,3. ... Now that the jumper is in the 'clear CMOS' pins, for how long should I power ... move the CMOS jumper to pins 2 and 3.. ...
    (microsoft.public.windowsxp.hardware)
  • Re: to clear CMOS
    ... from the original pin position to pins 2,3. ... Now that the jumper is in the 'clear CMOS' pins, for how long should I power ... move the CMOS jumper to pins 2 and 3.. ...
    (microsoft.public.windowsxp.hardware)
  • Re: pc wont wake up again
    ... is an older motherboard, which has a 1x3 row of pins, with one ... position for a jumper labeled as +5V and the other position as +5VSB. ... for power control, for all devices that might need power during sleep. ...
    (microsoft.public.windowsxp.general)
Loading