Cpu making grinding noise and vibrating

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Here's how the problem started..
My 17" crt display went kaput, and the monitor started emitting smoke. I closed the power immediately and that was it.
Forward 2 days later...
called in LG service and the guy fixed my monitor! bingo.
But now when I start my computer, it makes a REAL LOUD noise and everything vibrates wildly. the noise and the vibration 'stay' for 2-3 minutes before stopping.
Now I have searched a bit and come across several probable causes - and eliminated quite a few , like hard-disk, dvd-drive , wires touching fan..

What I really want to know is that cuold there be any relation between my monitor going dead an smoking, and the cpu vibration?

The system is functioning just fine right now and a soft reboot does not cause any sound or vibration. Also the problem does not happen everytime..

Specs -
17 inch crt LG
amd x2 4000
asus m2a-mx
1gb ram
no pci cards , pci-e cards..


--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
.

Relevant Pages

  • Re: Cpu making grinding noise and vibrating
    ... My 17" crt display went kaput, and the monitor started emitting smoke. ... What I really want to know is that cuold there be any relation between my monitor going dead an smoking, and the cpu vibration? ...
    (microsoft.public.windowsxp.hardware)
  • Re: Magnetic sheilding
    ... or on 240 volts or on 120 volts? ... if there is a power transformer feeding the building that you are ... field to cause waviness in a crt display. ... If you take a monitor with a fixed ...
    (sci.electronics.repair)
  • Re: Cpu making grinding noise and vibrating
    ... My 17" crt display went kaput, and the monitor started emitting smoke. ... But now when I start my computer, it makes a REAL LOUD noise and everything vibrates wildly. ... What I really want to know is that cuold there be any relation between my monitor going dead an smoking, and the cpu vibration? ... If its really not that, (and just pulling the power plug in the back of the DVD would test that), then I would look at fans. ...
    (microsoft.public.windowsxp.hardware)
  • Re: linux does not auto detect monitor type
    ... installation.Nothing is shown on the monitor. ... tried with an LCD monitor but it didn't work. ... Now I connected a new CRT display, ... Shut down, switch, reboot and it should be fine. ...
    (comp.os.linux.networking)
  • RE: [SLE] Monitor problem after system left overnight.
    ... the "vibration" suggests that it ... may be worth trying a "degauss". ... on the monitor casing. ... If that cures the vibration then Mike Roy's suggestion of ...
    (SuSE)