Re: device not responding -- which one?

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



The connector didn't necessarily seem loose, but I gave it a hard push in
anyways to check (actually did the other end of the ribbon too, just in case)
& rebooted -- the error didn't appear again with the re-boot.

I find it odd, as the CD-drive never stopped working -- I think I've even
burned with it since the error started occuring.

More annoyed with myself if it is fixed, because I've been worrying about it
for a couple of days. (I won't totally believe it until I don't see the
error tomorrow).
I'm just loath to pull out & open my tower.

Thank you.

"JS" wrote:

Power down the PC,
Next check the ribbon cable to your CD-RW to see if it's not loose.

If it seams to be fully inserted then disconnect the ribbon cable
from the CD-RW and reboot the PC,
if the error message no longer occurs then it's the CD-RW drive.

JS

"Amy" <Amy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DB0E3D1B-9647-41A7-A29C-8C7F82FBAE5D@xxxxxxxxxxxxxxxx
I've been getting the following recurring error on my computer:

The device, \Device\Ide\IdePort1, did not respond within the timeout
period.

How do I know which "device" this refers to? When I look at the Device
Manager both my hard drives & cd-drives are listed with IDE under the
description.

I know it refers to either my 2nd hard drive or my CD-RW drive. Googling
did not help me clarify, as I found the exact same error associated with
both
hard drives & cd drives.

I saw a suggestion to update my ATA controller & this didn't help. I also
saw a suggestion to check internal connections, but would prefer to know
which device's connections I need to check before I open up my computer.
I'm
hoping my new hard drive isn't dying.



.



Relevant Pages

  • Internet Connection Delays
    ... I have an Efficient Ethernet ADSL Speedstream 5100 (4 lights). ... Control Panel> Network Connections, I receive an error message that states ... several McAfee techs, an SP2 tech, and several techs with my ISP. ... I run Disk Cleanup for both my hard drives prior to shutting down. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Computer Wont Post
    ... Try opening case & reseating all connections, ... wife that her computer does not turn on when she presses the button. ... Is the motherboard bad or not getting information from ... try removing all hard drives and CD ...
    (microsoft.public.windowsxp.hardware)
  • RE: ata1: resetting devices ...
    ... These messages say you have a UDMA66 hard drive on the master ribbon ... connector of IDE1 and a UDMA33 hard drive on the master ribbon connector of ... This also can occur if you have two hard drives on the primary IDE ...
    (freebsd-questions)
  • RE: ata1: resetting devices ...
    ... These messages say you have a UDMA66 hard drive on the master ribbon ... connector of IDE2 controller and both ribbons are ATA66 ribbons. ... This also can occur if you have two hard drives on the primary IDE ...
    (freebsd-questions)
  • Re: 802.11n router recommendations and opinons...?
    ... I haven't seen any dropped connections with the ... and I'm running 3 different wireless routers on ... This means Windows users can't simply plug most of their USB external hard drives into the router and expect to share the data contained on it. ...
    (alt.internet.wireless)