Re: Installing the Zalman CNPS9700 LED

Tech-Archive recommends: Fix windows errors by optimizing your registry

On Thu, 5 Jun 2008 20:20:02 -0700, sgopus
<sgopus@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

Your opinion has nothing to do with his question and therefore doesn't belong
here, post it elsewhere.

"Gurney" wrote:

On Wed, 4 Jun 2008 15:51:00 -0700, attilathehun1
<attilathehun1@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:

I have a couple of questions here. Now don't tell me to go to their website
and get their support. Their support is down for a couple of weeks.
I have a Intel Socket 775. I want to know if I need to remove the
motherboard to put the backplate on. Anotherwords, do I need to install
anything on the underside of the motherboard? Also I want to know which bolts
I put the pressure on when I'm screwing them in. Do I put pounds of pressure
on the Four (4) Clip Support Fixing Bolts for Socket 775 or do I put the
pressure on the Four (4) Bolts ( for installing the cooler)? Anotherwords,
there are 4 short bolts and 4 long bolts, which ones do I put the pressure on
when I'm installing the cooler? Or am I wrong all together and I don't put
pressure on any of the bolts? Then, can you tell me what part of the
components I put the pressure on?
I have a feeling it's the short bolts I put pressure on. I would greatly
appreciated any hints someone could me on installing the cooler.
Thanks, attilathehun1

You know damn good and well this has NOTHING to do with the OS and as
such does not belong HERE.

Take it elsewhere


Your reply belongs down HERE, top poster

.

Relevant Pages

  • Re: Installing the Zalman CNPS9700 LED
    ... Their support is down for a couple of weeks. ... Also I want to know which bolts ... I put the pressure on when I'm screwing them in. ... pressure on the Four Bolts (for installing the cooler)? ...
    (microsoft.public.windowsxp.hardware)
  • Re: Installing the Zalman CNPS9700 LED
    ... The assembled thing slides over one tab, and then the other side snaps down ... Do I put pounds of pressure on the Four Clip Support Fixing Bolts for Socket 775 or do I put the pressure on the Four Bolts (for installing the cooler)? ...
    (microsoft.public.windowsxp.hardware)
  • Re: Installing the Zalman CNPS9700 LED
    ... Their support is down for a couple of weeks. ... Also I want to know which bolts ... I put the pressure on when I'm screwing them in. ... pressure on the Four Bolts (for installing the cooler)? ...
    (microsoft.public.windowsxp.hardware)
  • Re: Installing the Zalman CNPS9700 LED
    ... Also I want to know which bolts ... I put the pressure on when I'm screwing them in. ... pressure on the Four Bolts (for installing the cooler)? ... Since the upper socket is held down with screws, and the screws thread into the ...
    (microsoft.public.windowsxp.hardware)
  • Re: Installing the Zalman CNPS9700 LED
    ... Their support is down for a couple of weeks. ... What do the instructions that came with the unit say? ... Do I put pounds of pressure on the Four Clip Support Fixing Bolts for Socket 775 or do I put the pressure on the Four Bolts? ...
    (microsoft.public.windowsxp.hardware)