Re: HDD is not detecting
You need to read your motherboard manual, or IBM help.
Using a Sata drive can involve both bios settings and installing drivers
"Amar" <Amar@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:CDD244A1-36B3-4CD7-8DA9-72BE914152C2@xxxxxxxxxxxxxxxx
Hi all..am having IBM thinkcentre L9A11704 system with XP loaded
..HDD(SATA
HDD) is not getting detected ..chkd in bios also..tried to make it
automatic
detect but failed to do that.....coz of undetected HDD after restarting
it's
going to DHCP with revolving cursor page ...plz assist me
.
Relevant Pages
- Re: Problem with ide cable
... >> Someone said try the 80 pin, so i put the hd to master and dvd to slave, ... > Also, check the bios settings regarding ACPI/APIC, and PnP settings, and ... > up on installing and it just *looks* like it's having trouble copying ... > You can always manually copy the files to the HDD and run the install ...
(uk.comp.homebuilt) - Re: [SLE] What does the 03:43 refer to?
... Dylan wrote: ... > not using the bios settings for hd identifacion etc... ... > was going on at a level where Linux couldn't bypass it. ... hdd to hdd caused by jumper preferences. ...
(SuSE) - Re: Problem with ide cable
... Someone said try the 80 pin, so i put the hd to master and dvd to slave, now ... Also, check the bios settings regarding ACPI/APIC, and PnP settings, and ... up on installing and it just *looks* like it's having trouble copying ... You can always manually copy the files to the HDD and run the install ...
(uk.comp.homebuilt) - Re: Problem with disk dma mode (solved)
... It was a bad BIOS setting, it never crossed my mind that if something works in dma mode in one OS that it can't work with the same bios settings in another OS. ... other device (hdd) on IDE/ATA channel is uncapable of supporting UDMA ... bad BIOS settings (set Secondary Master to AUTO, and Slave to OFF ...
(comp.os.linux.hardware) |
|
