Re: laptop - new HD - no CD or floppy drive

I suppose you have since found out that smartdrv does
not create a virtual drive. It is a disk caching program
that speeds up the installation process enormously.

I wonder why you created your partitions the way you
did. Having partition 2 at 5 GBytes is useless - you might
as well do with out it. However, if you omit it then you
may not be able to use imaging programs as per my
first reply.

I suggest you give it another try, this time WITH smartdrv.
AFAIR, you will also need himem.sys plus a reference in
c:\config.sys like so:
device=c:\himem.sys



"JohnB" <jbrigan@xxxxxxxxx> wrote in message
news:uS4vnZcBIHA.1212@xxxxxxxxxxxxxxxxxxxxxxx
Ok, I tried this the first time through not quite sure what I would use
SmartDrv for, and I had a problem ( I know what it is; it creates a
virtual drive from RAM).

This is what I did;
- created 2 partitions; 1 = 35 gb and 2 = 5gb
- formatted both as FAT32
- Sys'd partition 1 (C:)
- the 2nd partition is D:
- copied the I386 folder from the CD to d:\i386
- put the HD back in the laptop and booted to Win98 command prompt
- from d:\i386, ran Winnt
- at that point it told me it could not find SmartDrv (now I know why it's
needed)
- selected the option to proceed without SmartDrv
- it gave me a message saying "copying files to drive"
- and then it stopped, seemingly in the middle of setup. The laptop was
not locked up. But it was still on the screen titled copying files.

Where'd I go wrong, other than not having SmartDrv?



You're on the right track but you need to make some adjustments:
1. Connect the new disk to the desktop PC.
2. Partition & format it like so:
First partition: 20 GBytes FAT32
Second partition: NTFS or FAT32.
3. Boot the desktop with a Win98 boot disk (www.bootdisk.com).
Make sure that smartdrv.exe is on that disk.
4. Run this command: sys c:. ((assuming that E: is
the first partition on the new disk)
5. Copy a:\smartdrv.exe to c:\.
6. Boot the desktop into WinXP.
7. Copy your WinXP CD to E:\i386 (assuming that E: is
the first partition on the new disk).
8. Install the new disk on the laptop. It should now boot into DOS.
9. Run smartdrv.exe.
10. Run this command to start the installation of Windows:
c:\i386\winnt
11. When finished, convert drive C to NTFS if desired.

With an ultraslim laptop like yours you must take extra precautions
to protect yourself against similar mishaps in future. Get yourself
a copy of an imaging program (e.g. Acronis TrueImage), then create
an image of drive C: and store it on drive D:. The next step is to
copy that image file to an independent medium so that you can
restore it if the disk should fail again (which, of course, it won't!).





.

Relevant Pages

  • Re: laptop - new HD - no CD or floppy drive
    ... SmartDrv for, and I had a problem (I know what it is; ... Sys'd partition 1 ... Boot the desktop with a Win98 boot disk. ...
    (microsoft.public.windowsxp.hardware)
  • Re: how to remove W2K from WXP
    ... So you have tried booting and hitting the F11 key? ... When you view in Disk ... Management you do not see a FAT32 partition about 2.95GB? ... installation of W2K I put the WXP disk in and ran Setup. ...
    (microsoft.public.windowsxp.general)
  • Re: Partition problem
    ... forces vie for your hard disk -- I've spent way too much of the last ... boot partition, it ended up somehow completely trashing the partition ... booted the eCS v1.1 installation disk and ran LVM. ... specify that it is a low-level format, ...
    (comp.os.os2.setup.storage)
  • Re: Compaq Evo n800w
    ... |> disk. ... | * Better disk geometry configuration. ... You can add a second Unix partition to use the rest ...
    (comp.unix.sco.misc)
  • Re: Crazy XP reinstall...what does this all mean???
    ... Create a DOS boot disk in Windows XP (using 'format' and checking the ... 'pqmagict.exe' which is rather an old version of Partition Magic for DOS but ... Put the XP Installation disk in and reboot to it. ... I was told to delete the windows partition and recreate it. ...
    (microsoft.public.windowsxp.general)