Re: Power supply question
- From: "Beverly Howard [Ms-MVP/MobileDev]" <BevNoSpamBevHoward.com>
- Date: Wed, 22 Aug 2007 10:17:07 -0500
>> would there be any problem it attaching 10 120mm fans to one
of the connectors as opposed to spreading them out over several? <<
First, you have to take full responsibility for doing anything like this, but...
If you open most power supplies, you will find that the color coded multiple wire bundles are all soldered to the same spot within the case, so the tech answer to your question is yes as long as the single wire coming out of the power supply is large enough to safely carry the amount of current totaled up by the ten fans.
Personally, I wouldn't do it with all ten fans... but would at least create two for five fans.
Look on the fans for the specs... either amps (milliamps) or watts, and post that here if you can't determine the total amps that ten would pull... also post the voltage and wire "color" as that will determine if the fans are 12v or 5v ...which directly relates to the amps...and directly relates to the recommended wire size.
Beverly Howard [MS MVP-Mobile Devices]
.
- Follow-Ups:
- Re: Power supply question
- From: M.I.5¾
- Re: Power supply question
- From: Vic Baron
- Re: Power supply question
- References:
- Power supply question
- From: Vic Baron
- Power supply question
- Prev by Date: Power supply question
- Next by Date: Re: Power supply question
- Previous by thread: Power supply question
- Next by thread: Re: Power supply question
- Index(es):
Relevant Pages
|