Power supply question


I have an 850W PS. Thinking of this like a typical house circuit with a 100
amp main and 30 amp circuits where you can overload a circuit but not blow
the main...... would there be any problem it attaching 10 120mm fans to one
of the connectors as opposed to spreading them out over several?

Trying to keep the case wiring minimal and if I can connect all the fans on
one power cable it would help.

Thanx
--
There are 10 kinds of people - those who understand binary and those who
don't


.

Relevant Pages

  • Re: Things youve upgraded or replaced
    ... appliance I have. ... is anything else on the circuit. ... are divided among four separate 20 amp circuits. ... I have never tripped a breaker. ...
    (rec.food.cooking)
  • Re: Power supply question
    ... 100 amp main and 30 amp circuits where you can overload a circuit but not ... Trying to keep the case wiring minimal and if I can connect all the fans ... magnetic-optical drive running off the molex connectors from the power ...
    (microsoft.public.windowsxp.hardware)
  • Re: help reading schematics
    ... > I'm relatively new to the field of electronics, and without a doubt I feel ... Sometimes it helps to re draw the circuit for yourself. ... bits that you know like regulator circuits, op amp circuits etc.. ...
    (sci.electronics.basics)
  • Re: Self-Cleaning Oven Power Needs
    ... 1960's era house. ... The specs say I need a 15amp circuit for the self-cleaning. ... 15 Amp circuits have been the minimum "standard" house wiring for some time with 20 amp circuits for the kitchen in newer homes. ... Wire size needs to be #14 AWG minimum for a 15 amp circuit. ...
    (alt.home.repair)
  • Re: Thanks to ALL who responded to above (live-neutral problem)
    ... It is entirely possible to overload a circuit ... Just what typical appliances have fuses ... Fuses are for protection in the event of failure ...
    (sci.electronics.repair)
Loading