Re: Replacing SCSI controller with a different model under XP

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance


"Tobijohn" <tobijohn@xxxxxxxxxxxxx> wrote in message
news:%23U6l2g51HHA.1168@xxxxxxxxxxxxxxxxxxxxxxx
Is there a way to replace a SCSI controller card with one that is a
different model without reinstalling XP? I currently have an Adaptec 19160
controller card and attempted to replace it with an Adaptec 2100S RAID
controller card but have been unable to boot XP successfully. It either
loops through the reboot process or gets as far as the screen menu that
comes up when windows has been shut done abnormally (so I know it's
reading
off one of the drives). For what it's worth, Adaptec says XP has the
drivers
necessary for the 2100S. Is there some trick to getting the existing XP
install to boot normally once the 2100S card is installed? TIA...




Try putting the original controller in...
then uninstall it from within the control panel...

shut down and put the new one in


.

Relevant Pages

  • Problems With Intel SRCU31L Raid Controller Card & FC3
    ... Hello guys,,, I'm trying to install on a server with Fc3, but the RAID ... Controller Card it's an Intel SRCU31L and it seems that the Driver Module ... I found that installing on a IDE Disk after all the installation it's done, ...
    (Fedora)
  • [SLE] Problems using Intel Raid Controller Card SRCU31L With SuSE 9.2
    ... Hello guys,,, I'm trying to install on a server SuSE 9.2, but the RAID ... Controller Card it's an Intel SRCU31L and it seems that the Driver Module ... I found that installing on a IDE Disk after all the installation it's done, ...
    (SuSE)
  • XP Professional and Raid Hard Drives
    ... controller card are you using? ... or are you using a seperate raid card? ... >RAID setup and started my install. ... >Then The Windows XP License Agreement came up on the ...
    (microsoft.public.windowsxp.general)
  • Re: Swapping SCSI controllers under XP
    ... I currently have an Adaptec 19160 controller card and attempted to replace it with an Adaptec 2100S RAID ... Is there some trick to getting the existing XP install to boot normally once the 2100S card is installed? ...
    (microsoft.public.windowsxp.hardware)
  • XP CD doesnt boot with RAID controller
    ... I've installed a PCI RAID controller card, based on the Silicon Image 680 ... But now I want to install a new XP directly on the RAID array and my XP ... installation CD won't boot. ...
    (microsoft.public.windowsxp.setup_deployment)