Re: Removed IDE drives, now won't boot off SCSI

Tech-Archive recommends: Fix windows errors by optimizing your registry


John;2930350 Wrote:

The boot files and the SCSI driver were probably on one of the IDE
drives. Was one of them drive C: before the change?

Many thanks, John. Ahhh! This is beginning to make sense! Yes, one of
them was C: (my Mp3 files) What do I need to do? Move the files?




--
Bargue
.

Relevant Pages

  • Re: Removed IDE drives, now wont boot off SCSI
    ... The boot files and the SCSI driver were probably on one of the IDE ... drives. ... I've not done it in this situation but I think a repair install of the ...
    (microsoft.public.windowsxp.hardware)
  • Re: Strange PEER error with Danis 506 1.81 generic question
    ... In the case of everything so far up until the Intel 915GAVL/GEVL and still in research 945 series motherboards, there have been two IDE controllers on the boards. ... Thus the primary hard disk controller from which the finished box will normally boot would be the Master on IDE controller #1. ... if there were, for example, two IDE hard drives, one would be the normal boot device as the Master on the primary IDE controller. ... to generate a report of scsi and "fake scsi" devices on a mixed scsi hard drives/ide dvd burner and dvd-rom system but I seem to recall that all scsi devices got listed before any ide devices - including the scsi scanner I had. ...
    (comp.os.os2.bugs)
  • Re: Changing Harddrives whilst PC includes a RAID Array
    ... Booting from Acronis CD after re-attaching IDE drive to system didn't work ... I detached both SATA drives and booted from Acronis Cd again ... ... case to ensure that RAID is not being 'attempted'on my IDE drive. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Changing Harddrives whilst PC includes a RAID Array
    ... I assume if your IDE drive is NOT ... attached, the SATA array will still boot, correct? ... Option #2 (should be done w/ SATA and IDE drives installed): ... install on the IDE drive. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Changing Harddrives whilst PC includes a RAID Array
    ... I have reformatted the IDE drive, to remove any issue with the old Windows ... I turned auto-restart off in my SATA-based Windows install; ... Remove any newly installed hard drives ... is the first boot device and the IDE the second. ...
    (comp.sys.ibm.pc.hardware.storage)